Hoover Recent Questions, Troubleshooting Help & Support

The hose leading from the tank to the sprayer head on the bottom of the unit, or the tank is not seated properly or the tank has a hole or crack

Question edited for a lot more clarity! Question moved from Laundry Dryers. Manual https://www.searspartsdirect.com/manual/57qr0qz9c6-000517/hoover-f5915-900-steam-cleaner-parts ..

Either the carbon brushes on the motor need replacing or the thermal cut out is activating. That might be because it is faulty or because there is not enough airflow over the motor. Overheating motor causing an automatic shutoff. This is most commonly caused by an air passage that is plugged by hair or dirt.

Hoover WindTunnel 2 Rewind Troubleshooting - iFixit

..

If it is new it is under warranty. Just take it back. The appear for have some 'history'. https://www.ifixit.com/Answers/View/14978/won't+suck+the+water+up+out+of+the+carpet Or the foam bubbles are lifting it up!

Ball for dirty water receptacle keeps popping up - Q&A

Best Buy https://www.bestbuy.com > site > questions > question Mar 11, 2016 - 1-2 of 2 Answers. Hi Ricky! The float can pop up prematurely if the filter is dirty or if you're using too much soap.

How can I turn the red lock symbol off on my Hoover? Washing machine 300 light.

This is a little joke that Hoover has played, and for some reason no one else has explained it. (One answer hints at it, but doesn't explain at all.) The height adjuster does NOT operate when the vacuum is in the upright & locked position. The tabs for the adjuster won't go into the holes above them until the vacuum is unlocked and at a slight angle. You can just install the height adjuster wheel assembly in the locked position, replace the lower cover, and voila! you will be able to adjust the height with the vacuum angled as it is for use. That's an hour of my life I won't get back!

It's plastic with chrome paint, not metal. Take it to a vac repair shop and have them fix it. You may break the tabs if you force it.

Its not an error it means its in delay start mode. Hold down the delay start button (looks like a clock) for 5 seconds and it should clear

When your Hoover spin scrub is not sucking up water, the most common problem is the clear round cap located on the suction nozzle is not closed. See pic. Also check the rubber cap on the dirty water tank.

Question edited for clarity. Question moved from Cars and Trucks. Described as a 'fixable design flaw'. https://www.google.com/search?q=Hoover+Wind+Tunnel+2+brush+roll+on%2Foff+pedal+not+working ..

I have this problem with my Hoover VHC681C. The plastic at the back of the condenser unit warps outwards and stops it fitting back in the hole. To work around the problem, when I've finished washing out the condenser I pour very hot water on the warped plastic to soften it, push it back into shape with a wooden spoon handle and hold it there while it cools. Then I hold it into shape with my fingers before slamming the condenser back into the hole. You have to be quick! A replacement condenser is £70 - £100 in the UK. Very disappointed in this machine. I will consider shaving off the warped plastic if it becomes too troublesome.

The only people that will know is Hoover. There are no clues in there. It could be 3 month of 2002, but anyone's guess. Phone them up.

If you go to www.Hoover.com, , on the lower left you will find a link to download manuals. Put in your model as instructed.

Question edited for a lot more clarity. Question moved from 'Filter Vacuums' to make model category. Yes, that part number is listed for your model here https://www.ezvacuum.com/hoover-40110001-43613021-selfpropelled-windtunnel-hepa-final-filter-generic-p-402.html Hoover Filter High Efficiency Filter for Windtunnel Uprights. Fits Models: Hoover Self-propelled WindTunnel Upright vacuum cleaner models including U6420-900, U6423-900, U6425-900, U6425-920, U6425-950, U6431-900, U6445-900, U6445-906, U6445-920, U6449-900, U6450-900, U6451-900, U6451-960, U6455-900, U6455-960, U6458-900, U6460-900, U6470-900, U6470-910, U6471-900, U6474-900, U6476-900, U6476-910, U6431-900, U6432-900, U6433-900, U6434-900, U6435-900, U6436-900, U6437-900, U6439-900, U6441-900, U6441-940, U6445-920, U6450-900, U6451-960, U6453-900, U6454-900, U6455-960, U6425-000, U6434900, U6436900, U6445-900, U6458-900, U6459-900, U6460-900, U6470-900, U6446-900, U6449-900, U6451-900, U6454900, U6471900, U6471-910, U6471-900, U6473-900, U5455-900, U6401-9RM, U64019RM, U6423-900. Measures app 10-7/16" x 3-5/16" x 1/2" Quantity Per Package: 1 Hoover vacuum cleaner Final Filter OEM Part Number: 40110001, 43613021, 40120101, FX-HVF067 Yours also seems to have its own standard filters not listed as HEPA. https://www.appliancefactoryparts.com/vacuumcleaners/hoover/u6437-900.html ..

The handle pedal is snapped in to the base, where it pivots.
The pedal needs to be pried away fron the base, exposing the pivot pin to release it for removal. On your model, you will likelly have to remove the lower handle from the base (where it pivots) to get room to release and replace the pedal.

Depending on the model and the country, the standard fuse is in the plug or it is the breaker. They do have an internal thermal fuse to protect against severe overheating. It is not resettable. https://www.helpowl.com/q/Hoover/FH50700/Technical-Support/fuses/1069077 There are many models with Power and Pet in the name. https://www.google.com/search?q=hoover+power+pet+carpet+cleaner+parts ..

Hello, check youtube link or search for Hoover e05 error. I hope to be usefull. All the best !

The latch at the bottom of your vacuum cleaner. The problem is that 'React' seems to be a range of cleaners. Google make model (number) parts diagram https://www.google.com/search?q=Hoover+React ..

Hoover Troubleshooting Brush Not Spinning Changing The Belt On Your Dual...

Most spares are to be found here; https://www.espares.co.uk/browse/at1084ma107/fridges-and-freezers/hoover