General Electric Hardware & Accessories - Recent Questions, Troubleshooting & Support

press and hold the timer key for 5-10 seconds see if it flash;s if so use the arrows for hour and min, comment back with all the setting/buttons it has other than temp for individual ranges :)
Hope this helps ya!

I found my manual...simplified version: 1) On the panel - press the manual button 3 times until Auto is lit - the remote can now be used 2) press on - on the remote 3) press the desired time (2, 4, 6 or 8 hours) on the remote 4) press repeat on, on the remote Timer should be set!! =) Pressing auto off wipes out anything that was programmed!! Pictures attached!

check repair clinic.com for a new thermostat sensor. Appliance Parts Lawn Mower Parts Heating Cooling Parts 365 day returns

Sounds like you bent the door where the lock is. You might have to replace the door.

You will get one on eBay uk

timer on what ? make, model and age of unit might be useful in forming a coherent response.

Open following link to see how to set timers by experimenting with features http://waterheatertimer.org/How-to-set-timers.html

http://waterheatertimer.org/How-to-set-timers.html Link above shows hot to set analog timers Gene Water Heater Timers Save Money If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7