Fujitsu Siemens PlasmaVision - Recent Questions, Troubleshooting & Support

HX2BJ-YJTTY-T27MD-767KPthis code is for all xp versions of windows but will need activating

check connections most likely culprit is a blown fuse on the screen mainboard very easy to replace but must be soldered unless you use a little bit of copper wire twisted and rolled up to cover both ends of the internal fuse then stick it down with insulation tape but do this at your own risk

Ok, I need more verifications:
1) Your TV is Fujitsu Siemens PlasmaVision P42VHA40 Monitor which does not have tuner? If not, please provide the make and model of the TV.

2) What kind of cables you are using to hook between the cable box and the TV? HDMI? Component video (Red, Blue, and Green cables withe RCA plugs)? Composite video cable with Yellow RCA plugs?

3) Are you trying to get the sound to come out off the TV speakers or through the stereo system?

well this is easier than you think, get yourself a set of RCA's (the red and white and yellow cables that DVD players come with) look behind your decoder and place them colour to colour, then behind your Amp you will read (TV IN) do the same, then with just one yellow RCA plug it into (monitor) that one will then go to the (AV input) behind your TV.. And presto!!! now set your amp input on the remote to TV and your off!! good luck

That is unusual - pressing in case should not effect play - not like a tape drive would.
Are you playing from CD or Hard-drive?
If Cd - try copy music to hard-drive and see how it plays - if ok - then something may be rubbing on CD in CD-Player? But that would give read errors. Have to remove CD Player and clean it.

Hi Brian,
It's not a problem as u think..
Yes your Ram is 256 M.B // but your Vga Card is built in the mother board with 64 M.B ..so it's share the Vga card Memory from ur basic ram (64 - 256 = 190~192 M.B) .
So u just need to increase ur rams by new one or replace this ur current ram by 2g.byte ram .

best luck.

LAN driver Support only for windows XP 32 bit OS. Link for Drivers: http://support.ts.fujitsu.com/download/ShowFiles.asp?LNG=COM

Visit Fujitsu's support site HERE.

Download and install the drivers you are missing.

That's it! :)

try this ,

just download this software,no need search engine,no more tired of looking anywhere...instantly,it will be in your laptop for several minutes....

CLICK ME

KEY : JCCQ-MAKC-KACK-6TSE-BN35


Driver Robot updates:

* Sound card drivers
* Printer drivers
* Video card drivers
* Motherboard drivers
* Webcam drivers
* Wireless drivers
* Bluetooth drivers
* FireWire drivers
* Ethernet drivers
* Windows XP drivers
* Windows Vista drivers
* USB drivers
* Chipset drivers
* AC97 drivers
* DVD drivers
* Router drivers

just install it,scan and download... enjoy...

I have Fujitsu laptop some of the keys are lock how do I unlock them please

Open your external HDD and take some aerosal to it if it's dusty. If that doesnt work re-format it via. mycomputer>right click external HDD>format>accept.
Had the same problem and it worked fine for me. Hope this helps!
-Crystal K

It's the condensator near RAM. Exchange - it works.300 µF / 6,3 V

WPA2 is considered insecure and hacked years ago. You might try WPA, or get a different Adapter.