Fisher Price Toys - Recent Questions, Troubleshooting & Support

I had the same problem with two of our three engines. I read somewhere that you can get them running by hitting the side of the engine against a hard surface. I can't believe it... IT WORKED! I guess the motor gets **** and hitting it will get it going. All three engines are working now.

How to assemble: Steps: Mechanism casing upside down: - insert man - insert on/off switch - insert small cover - insert small gear - insert H shaped part at the gear opening - align base and screws in w 2 screws Right side up: - attach big gear and axel to small gear inside casing - place scoring under axel and onto the base - align merri go round against mechanism and 2 screws Upside down: - screws 3 more screws of merry go round piece

sorry have no need to work on toys no small ones anymore

Check inside where the batteries are stored. There may be a switch that changes the language and it might have gotten jostled and switched on its own. If still no luck, remove and replace batteries to see if it resets. If that doesn't work contact Fisher Price customer service for more assistance. Bonne Chance! (That's Good Luck in French) If you haven't fixed your toy yet, you might already know that. =) Au Revoir

Finally able to install...Copy the contents to the CD into your hard drive, edit the Options.ini file so that it reads ShowVideoAdapterDetails=1. It will allow you to bypass the video memory check....Hope this helps

try to reset, insert small thin object with the batteries in and the product turned on. And check that batteries are both the same bransd and heading in the right direction and use the recommend type or brand if they have one.

Try getting a new one

Fisher Price Music box: to open, remove the four screws from the bottom, open the two parts as wide as possible without using too much force. Using a small flat blade screw driver, insert between the red cover and white top where the wind up knob is located. Pry the red bottom out far enough to allow the ring surrounding the knob to slide under the red bottom. The box is now open.

After repair, and re-assembling, make sure the wider part of the wind up stop wheel faces the front of the player, otherwise the wind up knob catches and slows the mechanism.

notify fisher price https://fisher-price.mattel.com/shop

As we can not fully see the damage my best bet would be to take it to a local "Mens Shed" where I'm sure they can fix it for you.

my grandsons broke their mother's (and aunts') FP music box. There was almost no sound The teeth are simply a wind-up music box set, connected to a rod that transmits the vibrations to the diaphragm under the pseudo-tone-arm. I was able to fix by placing a cotter-pin on the rod in the arm at or near the junction and then trim with wire cutters to the correct size. I checked the diaphragm first by tapping it through the arm/table connection.

Where does it go on my Jeep it only goes in reverse it’s brand new

Contact seller support

Try to put it new batteries. If not notify the person you bought it from or the store and ask for help or refund.

its broke buy a new one

Hello,

I would call customer support and find out why the powerwheel does not go into reverse. You advised that it was the f150. I can give you the link as to where I tried to see if there might of been a safety feature of not letting the unit go into reverse. Here it goes http://www.fisher-price.com/us/powerwheels/product.aspx?pid=38040 I am not sure if it is the same one. You can also call this number Contact Consumer Relations toll-free at 888-892-6123.

We are available Monday through Friday 9 AM to 6 PM Eastern Time, 6 AM to 3 PM Pacific Time.
They might be able to tell you about your exact model.

From where did you order it ?

Sorry we have no parts locator service here.

Has anyone been using anything beside the stylus your suppose to use? Cause that can damage the screen and make it not come on. Also i seen you said it won't recognize when hooking it up to computer. Make sure the program is installed on your computer and then unhook the cords from device and computer and reinsert them. Let me know what happens.