Equator Washing Machines - Recent Questions, Troubleshooting & Support
When I plug in my Equator EZ4000, all lights on the display panel illuminate and stay illuminated. They don't change to reflect the functions being performed.
If all lights on the display panel of your Equator EZ4000 washer dryer illuminate and remain illuminated without changing to reflect the functions being performed, it could indicate a malfunction with the control board or a possible software issue. Here are a few steps you can try to troubleshoot the problem:
1. Power cycle the unit: Unplug the Equator EZ4000 from the power source and wait for a few minutes. Then, plug it back in and see if the display panel resets and functions properly. Sometimes, a power cycle can help reset the control board and resolve minor software glitches.
2. Perform a factory reset: Refer to the user manual or contact Equator Appliances to find out how to perform a factory reset on your specific model. This process typically involves pressing certain buttons or a combination of buttons on the control panel to initiate the reset. A factory reset can often resolve software issues and restore the display panel's functionality.
3. Contact customer support: If power cycling and performing a factory reset do not resolve the issue, it is recommended to reach out to Equator Appliances' customer support directly. They can provide you with specific troubleshooting steps based on your model and guide you through the process of resolving the display panel problem. They may also be able to assist you in scheduling a service visit if necessary.
It's worth noting that working with electrical components can be hazardous, so if you're uncomfortable or unsure about performing any troubleshooting steps yourself, it's best to seek professional assistance from Equator Appliances or a qualified technician.
How do I reset my Equator Super Combo washer Dryer EZ4000?
To reset your Equator Super Combo washer dryer EZ4000, you can try the following steps:
1. Unplug the unit from the power source and wait for a few minutes.
2. Plug the unit back in.
3. Press and hold the "Start/Pause" button for about 5 seconds to reset the machine.
This should reset the washer dryer and clear any error codes that may be causing the issue.
Regarding the door interlock switch, you can try finding a replacement locally by contacting appliance repair shops or stores that specialize in appliance parts. You can also search online for retailers or websites that sell spare parts for Equator appliances. Provide them with the make and model of your washer dryer to ensure you get the correct part.
If the above steps do not resolve the issue with your washer dryer, it may be best to contact Equator Appliances directly or consult a professional appliance repair technician for further assistance. They will be able to provide you with more specific guidance and help you troubleshoot the problem effectively.
Hi I have been trying to find a handle for my
Yes, follow the above instructions to open the washer. It happened to
me last night. The machine was still locked and when I went to open it,
the handle just broke off. You have to push the part in (where the
plastic handle was) and use a screw driver to pull open the door
(simultaneously). I was able to find a company in Toronto/Mississauga
called Rapid Service who carry the parts and provide service for this
machine. The door handle costs $55 and can be installed by yourself (at
least if you are even slightly handy). I hope this helps others who
come across this problem!
How do I get into the dryer to replace the drum belt?
May I suggest you type "SearsPartsDirect" into your computer search engine, and then type in the model number found on the tag somewhere on the machine.
If they list it, you should find pictures of the machine.
To get to the dryer drive belt, you have to take the whole machine apart.
God bless your efforts.
Not finding what you are looking for?