Emerson Microwave Ovens - Recent Questions, Troubleshooting & Support

http://kitchen.manualsonline.com/manuals/mfg/emerson/mwg9115sl.html Manual has phone number and email address for manufacturer.

Question edited for clarity. This is what it looks like. A standard SES Appliance bulb https://www.ebay.com/itm/314808284288 Normally there is a door on the outside case. Some you have to remove all the case. Directions here. Make sure you keep away from the Capacitor and Step Up Transformer as it will make your hair curly. https://www.wikihow.com/Replace-a-Microwave-Lightbulb ..

have you tried the power button? link to manual copy and paste https://mans.io/files/viewer/396358/8

I can't understand why anyone would just jump on anyone because of basic suggestions. 2 cut through the chase I FIX EVERYTHING!! & WHEN I removed the cover GUESS WHAT!! THE FUSE WAS BLOWN!! IMAGINE THAT!! I haven't tried to replace it with the same rated 1 yet. But I will as I HAVE IN THE PAST!! I'LL keep all concerned UPDATED!!

No manual for that one, but the link might work better for you is you are outside Canada. The 8106 might be close enough. If you do a power reset, the power needs to be off for 5 minutes at the wall plug. https://www.google.com/search?q=emerson+microwave+mw8126w+manual ..

You cannot fix this

No theres no beep shut off. You could open the unit and risk getting the heck shocked out of ya and disconnect the small speaker mounted on the circuit board. You should take the unit to someone who knows about microwaves to do this for you.

From memory, they were about 675 watts? Most MW's are between 500 & 1000watts, from "those" days.

I bought my emerson microwave 3 years ago model# mw8115ss from walmart and have had all the problems that everyone has talked about and I thought about throwing it away until I thought about one small detail, the FUSE. China uses junky glass fuses that burst instantly with a slight power outage, door slamming to hard, moving it around, and of course constant use like myself always heating up water for bottles. I took the back of the microwave off and walla!!! a blown fuse, but wait!!! dont buy another glass fuse!!! go to your local home depot and get the ceramic fuse for microwave ovens!!! they are $2.83 at my local home depot. I replaced the junky glass fuse with the ceramic one and it has worked perfectly for six months now.

DONT let someone tell you that you cant replace a glass fuse with a ceramic one because they are full of boloney. My microwave did all kinds of things, it wouldnt turn sometimes, it would come on by itself, it would beep for no reason, turn but not heat up, you name it I had the problem. When a fuse starts to go out it can make your appliances do some strange things, check the fuse and replace it with a CERAMIC one and I promise it should eliminate your problem.

Ah Nora We spoke yesterday. You have 10 Power Levels Nora from 10% power and in 10% increments all the way up to 100% Power. You didn't read the manual did you? :>D I just did and here it it is on the page you need to read. https://www.manualslib.com/manual/47081/Emerson-Mw9113ss.html?page=9#manual and you have Defrost which I mentioned and is pulsed Power. https://www.manualslib.com/manual/47081/Emerson-Mw9113ss.html?page=10#manual ..

Question edited for clarity and to add the make. Question moved from Computers to Emerson Microwave. It appears to be a rather obscure model and is not available. https://www.google.com/search?q=Emerson+mw7315b+manual The Model 7300 is the closest. https://www.manualslib.com/manual/255271/Emerson-700w.html .. ..

The owner's manual is here. On page 10 we find:

COOKING IN ONE STAGE
1. Press the POWER button; the Microwave and High
Cook indicators will light and “PL 10” will light in the
display.
2. Press the POWER button different times to set the
desired power; the display will show the percentage
you chose. If selecting power level 70%-10%, the
Low Cook indicator will light instead of the High
Cook indicator.
3. Press number keys to set the desired cooking time.
OPERATION(CONTINUED)
4. Press the START/+30SEC. button to start cooking;
the Microwave and one of the Cook indicators will
blink and the display will countdown the remaining
cooking time in minutes and seconds. It will beep
five times when cooking is completed.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Request the manual directly from Emerson.

The outer cover would have to be removed to gain access.

The fuse is internal.

My GE microwave has a metal stand that sits on top of the glass tray and places food closer to the magnetron for browning. Emerson may use a similar arrangement.

1. Open internal fuse 2. Magnetron failure 3. Control board failure 4. Door interlock failure 5. Touchpad failure

Depends on the make and model but they are required to post that information on a label on the unit. It may be on the back or the bottom. IF the label is missing, it is probably pulling around 15 AMPS

replace control panel