Dodge Popular Questions, Answers, Tips & Manuals

Please don't type in all CAPS, it is considered SHOUTING and is difficult to read, plus you have absolutely no Punctuation! That is not one sentence. No idea when one part end and another starts. The issue is the horn switch itself or the 'clock spring' in the steering wheel. Test and trace the switch and wiring. https://www.google.com/search?q=2007+dodge+caravan+horn+not+working https://www.google.com/search?q=2007+dodge+caravan+clock+spring https://www.google.com/search?q=auto+electrician+near+me ..

Question edited for clarity and add some punctuation. Question moved to model category. For strangeness like that, you need an auto electrician with a professional grade scan tool computer to check for diagnostic trouble codes. They can also record what happens after 5 or 10 minutes when the light comes on. Some ideas in the link https://www.google.com/search?q=1997+dodge+3500+charging+light+comes+on+after+10+minutes ..

Fuse and Relay? https://www.google.com/search?q=2013+dodge+charger+a%2Fc+relay+location ..

The ballast resistor in your 1997 Dodge B3500 van is situated under the exhaust manifold, where the engine and transmission connect. ballast resistor ' DodgeTalk Forum

Is the trailer wiring new or was it already fitted and the problem has just started happening? Does this problem happen all the time or only when the trailer wires are plugged in? This may sound silly but does the weather affect the problem? For example does it happen after it has been raining and stops when the weather dry up? Have you tested the wiring with a voltmeter/multimeter for actual live voltage? Using the multimeter on DC volts start at the actual light fitting and work your way backwards. Remove the bulb and test for voltage in the hole the bulb fits into. Next test behind the bulb where the wiring connects to the light fitting. This tests the light fitting itself. Follow the wires back and find where the trailer wiring connects into the wiring harness then check for voltage before and after the connection. This tests for issues between that connection and the trucks rear lights. As you follow the wire look and feel for damage as a small cut or break in the wire can cause big issues. Check any Ground (earthed) points aren't loose or corroded. If there is still no voltage the next place is the fuse box. A lot ot tail light issues are often in the wiring somewhere near the actual light fittings.

Question edited for clarity. A 'witch' is a lady with a pointy hat that use a broomstick for transport. :>D The distributor will only go on one way that is a small notch in the cap that drops into a notch on the distributor body. Here is the 'firing order', what spark plug wire goes where. https://www.google.com/search?q=1978+dodge+tradesman+v8+firing+order ..

number 9 https://fuse-box.info/dodge/dodge-ram-1500-2500-3500-1994-2001-fuses-and-relays https://www.youtube.com/watch?v=uzAA9-XL2nU

It will be the 2nd sensor in the exhaust from the engine usually down by the catalytic converter.

A few possibilities: Key FOB Proximity: If the key FOB is near the vehicle, the "Push to Start" screen might stay on. Door Sensor: If the vehicle's door sensor is malfunctioning or if the doors are not properly closed, it could cause the screen to stay on. Battery Issues: If there's an issue with the vehicle's battery or the battery of the key FOB, it could potentially cause this problem. It's also worth noting that some users have reported similar issues with their vehicles and have found success in disregarding the prompts asking to turn off/turn on the car You may have to go to a professional mechanic to get this properly diagnosed. That said, here is the service manual: https://cardiagn.com/dodge-charger-2015-2018-service-manual-wiring-diagrams/

Who told you there was a 'power window module'?https://www.google.com/search?q=2017+Dodge+Journey+power+window+Module All things like that are controlled by the BCM (body control module) via switch and regulator. You don't want to be playing with the BCM, it is a computer, nothing more. https://www.google.ca/search?q=2017+DODGE+JOURNEY+BCM ..

The starter relay is found in the underhood fuse panel, located driver's side of the engine bay between the battery and the shock mount.

Question edited for clarity.

Dodge Caliber (2006-2012) fuses

Fuse Box Diagrams https://fuse-box.info > dodge > dodge-caliber-2006-20... Fuse box diagram (location and assignment of electrical fuses) for Dodge Caliber (2006, 2007, 2008, 2009, 2010, 2011, 2012).

Dodge Caliber fuse box and relays diagrams

StartMyCar https://www.startmycar.com > dodge > caliber > info > f... Dodge Caliber fuse box and relays diagrams. Explore interactive fuse box and relay diagrams for the Dodge Caliber. Fuse boxes change across years, ...

Layout of the fuse box ' Page 2

Dodge Caliber Forum https://www.caliberforumz.com > threads > page-2 Every Caliber has the fuses listed in the Owner's Handbook Integrated Power Module (IPM) The Integrated Power Module (IPM) is located in the engine . ..

Check for fuel pressure at the rail. Looking at those fuel trims it is trying to get more fuel into the engine but it looks like there isn't anything more for it to give.

Check Fuse 14 Dawn

Dodge Dakota (1996-2000) fuses and relays

Fuse Box Diagrams https://fuse-box.info > dodge > dodge-dakota-1996-20... Fuse box location. The fuse panel is located behind the cover on the driver's side of the dashboard. The location of the fuses in the passenger compartment: ... https://www.google.com/search?q=1996+dodge+dakota+lights+not+working ..

Shock Absorbers are easy to test. Put your hand on the front of the vehicle on each side and press down and up hard and see if the body bounces. It should be hard to press down and come back up slowly and controlled. It could also be the springs, the upper mounting rusted away, worn ball joints, steering tie rod joints or CV Axle universal joints. All those need testing professionally on a lift. It is 32 years old after all. ..

Question edited for clarity. 'Manuel' is the name a Spanish gentleman, a 'manual' is the book you need. There are some good ones in here. https://www.google.com/search?q=1978+Dodge+Tradesmen+manual ..

https://www.justanswer.com/dodge/53nm5-dodge-neon-agjust-throttle-cable.html

The 2001 Dodge Ram 1500 5.2 does not come equipped with a factory-installed cabin air filter. As a result, there is no need to locate or replace a cabin air filter in this vehicle model. Keep in mind that newer vehicle models may be equipped with cabin air filters, but for the 2001 Dodge Ram 1500 5.2, it is not a standard feature.

With drivability symptoms like that, I'm assuming there has to be a "check engine" or "service engine" light, lit up on the dash?Getting it scanned for codes is a good step in the right direction to narrow down the cause of the problem. If there are any codes stored.

Videos. It is very easy. https://www.carcarekiosk.com/video/2000_Dodge_Caravan_3.0L_V6/air_filter_cabin/replace