DigiWeigh Measuring Tools & Sensors - Recent Questions, Troubleshooting & Support

It should be self checking and need no 'adjustment'.

Remove the battery - this happens when the scale tries to use a dead battery instead of the wall power supply.

Hi,
you need just to recalibrate it:
The procedure is standard for semi-all models of pocket scales, but the way how to get to calibration mode differs from model to model (or vendor to vendor).
In brief:
1.While turn-on get to the calibration mode (by pressing and holding the ON button, or holding TARE while turinig on) You should hold this "magic" combination until the LCD will show a number (large number - it was more than 2000 in my case). This number is a raw data from the sensor.
2.Now release the "magic" button.
3.Press it one more time, the display will show 2Ero and then 100.0
4.Now put calibrated weight of 100 grams on the scale and wait 3 seconds.
5.Press "magic" button again.The display will show CAL and then PASS.
6.Now remove the weight and turn off the scale.
7.Thats all - now you can use your scale as usually.

It worked on mine, I pushed Mode, Power, Tare at the same time. It came up in Cal mode. I added penny's till it was 995 or so then added small pieces paper to it till it was 100 then up popped passed. I turned it off then it works fine now. Thank You!!!!!!!

Why would it do that after you change the batteries though? Im having the same issue

I thought the scale was just completely broken, I was able to fix by doing the following.

1. turn unit off
2. hold down the on/off/tare AND the MODE button.
3. The unit will come up with a bunch of numbers on the screen. Release the buttons
4. Press MODE once, you will see "100" flash on the screen. if you don't press the button a second time.
5. place 100g of tare weights on the scale.
6. Press MODE button again. After this my scale said PASSED and shut off.
7. remove tare weights and turn device on. It should now register properly.

In my case. the scale was misregistering the 50g weights as 75. I shut it off. I pulled up ever so slightly on the scale plate on the hinge side of the plate are repeated steps 1-7.

I have no idea why they don't have a 3 part calibration on these.

It is working like a charm now!

Have you tried removing the battery, it should return to default settings

1. First, try recalibrating the scale with nothing on it.
2. If there is a reset button on the device, press it.
3. Try replacing the battery.
4. If it still acts up, it's probably time to get a new scale.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514