Dell Computers & Internet - Recent Questions, Troubleshooting & Support

It is too old, plus XP is a virus magnet and has been unsupported by Microsoft for nearly 15 years. Mainstream support for Windows XP ended on April 14, 2009. Windows 7 and 8 have passed you by, Windows 10 is current and Windows 11 awaits. https://www.google.com/search?q=Dell+Latitude+won%27t+connect+to+internet.+Windows+XP ..

Use a program called Kon-Boot it will bypass all Windows security altogether

Make sure the second HDD is formatted GPT otherwise it won't work.

You are lucky, it is a small replaceable circuit board. Remove it and test it. https://www.google.com/search?q=dell+11+pro+5130+on+off+switch+replacement ..

well in order to get rid of the self test window from your monitor... check the cable that connects your monitor to system tower & reset the connection... becase that is the only possible cause of the self test showing up on your monitor...

" as the self test option only appears when there is no video signal going from your video card to the monitor...

Check out Big Fish Games. It is a subscription service but they have all types of games including adventure and hidden object. You can also tryp Pogo since they have both a fee and subscription service. Last, but not least, you can try one of your local computer stores or the electronics section of "big box" stores like Target, Walmart, Kmart, etc.

I believe you have used the wrong type of CMOS battery. Try putting the old one back in and see if it will boot. If not the CMOS NAND chip may be broken. If this is the case contact Dell and order a new one.

Amazon, or if you only want the main lead, Walmart.

AC/DC Adapter For Dell Inspiron 20 Model 3052 20- ...

Amazon.ca https://www.amazon.ca > Adapter-Inspiron-20-3052-... AC/DC Adapter For Dell Inspiron 20 Model 3052 20-3052 W15B W15B002 All-in-One Desktop PC Power Supply Cord Cable PS Battery Charger Mains PSU : Amazon.ca: ... $26.27 · ‎ In stock ..

I would try another power supply and plug that in.

Insiro o c?digo em meu PowerDVD 15 e n?o ativa (Bloqueado)

http://support.dell.com/support/edocs/monitors/r83546/EN/setup.htm#Using the OSD
"NOTE: When using DVI source, the contrast adjustment is not available"

Log on to Dell Support with another computer. Enter service tag and follow instructions from there.

Here is Dell's proprietary pinout for this P/S

Pull the hard drive, clone it, make sure you have the data. Then redo the machune

Try replacing the BIOS battery for access to the computer.

Windows can be accessed renaming two files. computingterror.blogspot.com/2014/03/hack-windows-7-login After that being done you should run the Support Assist OS Recovery from DELL dell.com/support/kbdoc/en-us/000177401/restore-your-system-using-dell-supportassist-os-recovery Windows 10 can renew itself, without Windows Setup on a USB medium.

Visit the support page of Dell Support for Dell Wireless Keyboard and Mouse - KM117 ' Documentation ' Dell US Read the Keyboard Troubleshooting and Usage section for solution.

three little dots - ... - right at top of the page you are working on, click into them.

Go here [9 Ways] How to Open Windows 11 Device Manager Quickly? - MiniTool Remove all device under sound video and game controllers, and audio in and out.. Then reboot your computer.

Based on the description you provided, it seems you experienced an issue with a Dell XPS desktop, where the computer froze during a Netflix video, emitted a humming noise, and after a forced shutdown, you received 4 short beeps repeatedly during boot attempts. Eventually, the computer booted normally. The beeps you hear during startup are part of the system's Power-On Self Test (POST). They can indicate hardware or system issues depending on their pattern. For Dell systems, 4 short beeps usually indicate a RAM read/write failure. This could be due to a few reasons:

1. Faulty RAM Stick: One of the RAM sticks may be malfunctioning.
2. RAM Slot Issue: The slot into which the RAM is inserted might have an issue.
3. Temporary Glitch: Sometimes, minor electrical or static discharges can cause temporary glitches that can lead to POST errors. This might explain why the computer eventually booted up fine.

Here are steps to troubleshoot this:

1. Reseat the RAM: Turn off the computer, unplug it, open the case, and carefully remove the RAM sticks. Then re-insert them to ensure they are seated properly. This can sometimes resolve minor connectivity issues.
2. Test with One RAM Stick: If you have multiple RAM sticks, try booting the computer with just one stick at a time. This can help identify if a particular stick is faulty.
3. Try Different RAM Slots: If you suspect a slot might be faulty, try placing the RAM stick into a different slot.
4. Clean the RAM Slots: Sometimes, dust or debris in the RAM slots can cause connectivity issues. Clean the slots with a soft brush or compressed air.
5. Check for Overheating: Overheating can lead to system instability. Ensure your computer's fans and heatsinks are free of dust and functioning properly. Also, make sure the system is in a well-ventilated area.
6. Memory Test: Run a memory diagnostic tool to check for RAM issues. On Windows, you can use the built-in "Windows Memory Diagnostic" tool.
7. Inspect for Other Issues: Look for any obvious signs of damage or issues inside the computer, such as blown capacitors, disconnected cables, or other hardware anomalies.

If the problem reoccurs, and if you've isolated it to a faulty RAM stick or slot, you may need to replace the RAM or consider servicing the motherboard. If the computer continues to work fine without any more issues, it might have been a one-time glitch. Always, but especially now, make sure to back up important data regularly in case of unexpected hardware failures.