Crosley Kitchen Ranges - Recent Questions, Troubleshooting & Support

Did you ever find one? I'm looking for the same thing.

You can try this..turn the circut breaker off for a couple of minutes to see if it resets.

I think you need you to find a technician for that fix.https://chicagotuckpointingandmasonry.com

This model number does not show valid, please double check. In general, if the surface burners work, then suspect a bad oven ignitor. Does the ignitor glow? If so, and the burner doesn't come on within 30 seconds, replace the ignitor, it's weak and not passing enough power to open the gas valve. If the ignitor does not glow then you must check the ignitor for continuity (replace if open/no circuit) and back check the circuit for lost power. If not the ignitor then suspect a bad relay on the control board.

If it is not equipped with ground wiring and sockets etc., it dont need it..

Most Frequent Causes for F5 - A "watchdog" circuit on the clock assembly control board is sensing a hardware problem

Replace clock assembly

https://www.repairclinic.com/RepairHelp/FaultCodes/10/Range-Stove-Oven

I had the same thing going on literally just now. I unplugged it, plugged it back in, and now it is working fine. O.o

Check the burner orifice and clean them, boil over and food can plug them