Home Automation - Recent Questions, Troubleshooting & Support
There are 2 black boxes on the screen that say switching to HD bases on your preferences, how do I get these off the screen
Reach out to Xfininity and mention equipment update.
Here's what you can do to resolve it:
Check Your TV Boxes:
These messages might be related to your TV boxes or equipment. Ensure that all your Xfinity TV boxes are functioning correctly.
If you have more than one TV box, verify that each one is working as expected.
Replace Outdated TV Boxes:
Over time, TV equipment needs to be updated to keep up with the latest technology. If you rent equipment from Comcast, you can get an update at no additional cost.
To check if your TV boxes need replacement:
Tune to channel 1995 on each of your TVs.
Follow the instructions provided on-screen.
It will let you know if a TV box is compatible with the upcoming changes or if it needs replacement.
Note that TV adapters (small devices approximately the size of a deck of cards) do not need replacement.
Order New Equipment:
If your TV boxes need replacement, you can:
Go to xfinity.com/equipmentupdate and follow the prompts to order new equipment.
Visit an Xfinity Store or Comcast Service Center to exchange your existing equipment.
Contact Xfinity to place an order or schedule a professional installation (additional fees may apply).
If you own your equipment, check My Device Info to find compatible modems for your level of service.
Returning Old Equipment:
Once you receive your new device(s), you have three options for returning your rented equipment:
By mail: Use the return label in your Getting Started kit.
In-store: Exchange your existing equipment at an Xfinity Retail Store.
By appointment: If your new equipment is professionally installed, the technician will take your existing equipment.
My uniden ubw2101 baby monitor will not pair up so what can the problem be?
Check Power and Connections:
Ensure that the power adapter is properly connected to the camera's DC IN jack.
Verify that the power cable connection is secure.
Confirm that the camera's battery is not depleted.
Pairing the Camera:
Press and hold the pairing button on the camera until you hear a prompt tone.
On the display screen of the monitor, press the OK button to start the pairing process.
If the camera is not paired with the receiver, follow the pairing operation details provided in the manual.
Service Range:
If the camera is out of range, move it closer to the monitor to establish a connection.
Remember to consult the Uniden UBW2101 Owner's Manual for detailed instructions and troubleshooting guidance. You can find additional help on the customer support page of Uniden's website1. If you continue to experience issues, consider reaching out to their customer care line for further assistance.
My wemo insight switch quit working. Wemo does not answer my emails. How to I remove the Insight switch but not delete my wemo light switch?
Restart the Wemo Insight Switch:
Sometimes a simple restart can resolve connectivity issues. Unplug the Wemo Insight Switch from the power outlet, wait for about 10 seconds, and then plug it back in. Observe if it responds after this.
Update the Wemo App:
Ensure that you have the latest version of the Wemo app installed on your phone. Outdated apps can sometimes cause communication problems with the devices.
Check Your Wi-Fi Network:
Confirm that your Wi-Fi network is functioning correctly. Since you mentioned that you've already checked your Wi-Fi, let's move on to the next steps.
Factory Reset the Wemo Insight Switch:
If the switch remains unresponsive, consider performing a factory reset. This will remove any stored settings but won't affect your other Wemo devices.
Here's how to do it:
Press and hold the small tab at the bottom of the Insight Switch for 10 seconds until the light blinks red.
Wait for the light to blink blue again, indicating that the switch is ready to be paired with the Wemo app.
Connect the switch to your 2.4 GHz Wi-Fi network (not the 5 GHz network, as the switch isn't compatible with the latter).
Re-Add the Wemo Insight Switch:
After the factory reset, set up the Insight Switch again using the Wemo app. You'll need to provide a custom name and picture for it.
During the setup process, make sure to select the correct Insight Switch and not accidentally remove your Wemo light switch.
Contact Belkin Support:
If none of the above steps work, I recommend reaching out to Belkin's customer support. While email hasn't been responsive, you can try other channels such as their official support website.
How do I turn on the spa with an Aquapod?
In the Aquapod remote control, press the "Menu" button until the settings menu appears.
Use the right arrow to find the "Teach Wireless" option and hold the plus button until it says successful.
On the pool control local display/keypad, press the "Menu" button until the "Settings Menu" is displayed.
Use the "<" or ">" buttons until "Teach Wireless" is displayed.
Press the "+" button to start the teaching process .
Turn the top valve 180 degrees to switch from pool return to spa jets.
Turn the bottom valve 180 degrees to switch from pool suction to spa suction.
Turn the gas on at the heater.
Press the spa button on the heater and adjust the temperature if needed.
Turn on the timer and make sure it is not past the off trip.
When done, turn the heater off manually and switch the valves back to pool mode.
12/30/2023 6:57:31 PM •
Hayward...
•
Answered
on Dec 30, 2023
Just need the instruction manual
Here is a link to one of them - http://www.springfieldprecision.com/wp-content/themes/starkers/style/manuals/manual-91455sfd.pdf - you can replace the model with your specific model to see your manual. The site doesn't work correct to do a search. Hope this helps.
Not finding what you are looking for?
