Casio Retail Supplies - Recent Questions, Troubleshooting & Support
How do i reset my grand sales on a casio TE 2000
very simple solution with no reprogramming of the unit.
- in Z mode: make a report and read the grand total sales amount
- in RF mode make a refund of that amount
- in Z mode make a report again to check that the grand sales is zero.
IBM Toshiba SurePOS 4852-580 15 , cash register.
If an IBM Toshiba SurePOS 4852-580 15 cash register that you purchased used is not allowing you to make any changes and says "unauthorized," there could be a few possible causes:
- The cash register may be locked by a previous owner: The cash register may have been locked by the previous owner with a supervisor password. You will need to obtain the password to make changes.
- The software may be outdated: The software may be out of date and require an update. You will need to contact IBM for assistance with this.
- The system may have been tampered with: The cash register may have been tampered with, which could have caused the system to become locked and require a service technician to reset it.
- The cash register may have a security feature enabled: Some IBM Toshiba SurePOS have a security feature that allows only authorized users to make changes. You will need to contact IBM for assistance with this.
- The cash register may have an issue on the hardware: some issue on the hardware of the device could be preventing the device from functioning properly.
Tax rate on sharp xe-a102
To change/program the tax rate, use the following procedure:
- Turn key to Z/PGM position
- Press 8
- Press #/ST
- Press A
- Press #/ST
- Press 2 (Auto Tax)
- Press #/ST
- Press 097500 (9.75%)
- Press #/ST
- Return key to normal mode
This procedure should program your tax rate at 9.75%
- Press #/ST
Casio ce6000 error code e004
That means it is having trouble with the memory backup. Don't unplug the machine as it is about to lose all programming and sales data. Has this machine been turned off for a long period of time? When was the battery last replaced?
How can i reset my
Hi. You don't want to reset it unless you have to, as this will mean a
lot of extra work for you. Better to find out why it won't let you
program it.
First of all, do this:
Turn the power off at the wall
Turn the key to PROGRAM
Now keep your finger on the RECEIPT FEED button while you turn the power back on, and keep holding it down for 5 seconds.
Let go, and you should see "FFFFFFFFF" on the display
Press SUBTOTAL
Wait for print out.
On the print out, near the bottom, you should see "FC" on the left, and then a number on the right.
Tell me what that number is, and I can help you further.
My Sharp Cash Register (ER-A410) won't turn on in manager mode
Hi.
It is usually caused by a faulty or dirty mode switch. The first thing to try is squirting a bit of electrical lube down the key hole (WD40 or similar works fine), then turn the key back and forth a few times. Otherwise, the contacts inside the switch may have failed. I have also had a loose connector on the main board cause this in another model, so you could try pushing the connectors inside and make sure they are tight.
Hope this helps. You can set the void button to work in REG mode if you don't want to get the MGR mode fixed. Just let me know and I can look up the codes for you. You should be able to refund items as well (unless this has been set work in MGR mode also).
Mark
How to put name into Casio qt 6000
Mode PGM 3
Clerks
pick the clerk you want to use
Put you new name in the the description
you might need a number
them ESC all the way out
now Mode REG
job done
Need operating manual for Geller NT-1081
You can download a manual here for
4.99 Pounds
http://www.eposwizard.co.uk/catalog/geller-nt1081-programming-operation-manual-p-423.html?osCsid=03b8d93971525f0e1b634a1cdca79f38
I do not have any affiliation with this website. hope the information is usefull to you.
Not finding what you are looking for?