Casio fr-2650 plus is showing an E on the screen
Follow theses steps (from Casio Support) :
First, check the batteries, and ensure there is not a paper jam in the printer.
If both are fine, then while the calculator is in the "Print" mode, press the [CA] (or [AC]) button 20 times consecutively to clear out memory buffers. Try some numerical calculations, and if the problem persists, repeat pressing the [CA] button 20 times.
If the problem still persists, then the calculator may require service
4/11/2024 5:04:35 AM •
Casio...
•
Answered
on Apr 11, 2024
My screen says DEC 0
Your calculator is in binary mode. Press MODE 1 to switch to "normal" mode or MODE 2 to switch to complex mode.
How do you get a
Some keys have a letter of the alphabet next to them. The letters are A, B,C,D, M, X, Y. They correspond to memory registers (memory locations) in which you can store values.
To enter a letter as when you are entering an expression with variables, you press the [ALPHA] key followed by the key next to which is the letter you seek. To enter letter A, You press [SHIFT] [(-)] if I am not mistaken.
Hola, me obsequiaron un casio paw1300 3070, la carga esta al maximo y puedo ver hora y fecha, pero las funciones no dan lecturas, altitud, etc, tampoco funciona la luz, cual sera el problema?
English translation;
Hello, they gave me a casio paw1300 3070, the charge is at maximum and I can see the time and date, but the functions do not give readings, altitude, etc., the light does not work either, what would be the problem?
Casio paw1300 3070 Problems
How do i reset my grand sales on a casio TE 2000
very simple solution with no reprogramming of the unit.
- in Z mode: make a report and read the grand total sales amount
- in RF mode make a refund of that amount
- in Z mode make a report again to check that the grand sales is zero.
Oi como faco para tira
Wale Sarumi KomputerSolu??o
jullymarrodr says:
Ol?, como fa?o para remover a letra E que aparece na tela da calculadora quando coloco no modo impress?o, ? uma calculadora casio hr100mt
2/8/2024 12:24:27 PM •
Casio...
•
Answered
on Feb 08, 2024
My casio KL-60 Power ON got message ERROR!. How to clear the problem
Here are some steps you can try to clear the problem:
- Check the Label Tape: Ensure that the label tape is properly installed and correctly aligned in the label printer. Sometimes, an improperly installed label tape can trigger an error message.
- Check for Paper Jams: Open the label printer and check for any paper jams or obstructions that might be causing the error. Clear any jams or obstructions you find.
- Replace the Batteries or Use AC Power: If your Casio KL-60 label printer is powered by batteries, try replacing the batteries with fresh ones. If you're using AC power, make sure the power adapter is working correctly and properly connected.
- Perform a Soft Reset: Turn off the label printer and unplug it from the power source (if applicable). Wait for a few seconds, then plug it back in and power it on again. This can sometimes resolve temporary issues.
- Check the User Manual: Consult the user manual or troubleshooting guide that came with your Casio KL-60 label printer. It may have specific instructions for troubleshooting error messages.
- Factory Reset: If the error persists and you have tried all other steps, you may need to perform a factory reset to restore the printer to its default settings. Keep in mind that a factory reset will erase any custom settings you may have made.
Not finding what you are looking for?