Water Dispensing & Filtration - Recent Questions, Troubleshooting & Support


Steve's response is dead on. You can buy a replacement timer from Sears for $291. In addition, the lack of the unit regenerating probably caused the resin capacity to be exceeded and is permanently damaged. (Withour regeneration, the beads continue to expand and will eventually burst.)

Besides Home Depot, Sams Club, Costco, Lowe's, or Menards have low cost units and would be a better investment than putti a new timer and resin in an old unit.

Sears replacment timer: https://www.searspartsdirect.com/part-number/7288578/0042/625.html?pathTaken=partSearch&q=7288578

Kenmore Water... | Answered on Sep 13, 2019


It may be time to replace the light or the Light ballast.


To reset the CHANGE FILTER indicator light, press and hold the LOCK and LIGHTkeypads until the CHANGE FILTER light blinks (approximately 3 seconds). The control for the light is now reset for another 12 months or 416 gallons of use.

Water Dispensing... | Answered on Sep 13, 2019


It screws on to the tank. Make sure to relieve water psi. Turn the water off first.

Water Dispensing... | Answered on Sep 13, 2019


It is common for it to have high PH after replacing filters. It will adjust after the first 15 to 20 gallons. When I replace filters 10.8ppm to 11.2ppm is normal. After so many gallons I read 9.6ppm https://www.freedrinkingwater.com/faq.htm

Water Dispensing... | Answered on Apr 02, 2019

Not finding what you are looking for?
Water Dispensing & Filtration Logo

561 questions posted

Ask a Question

Usually answered in minutes!

Top Water Dispensing & Filtration Experts

ray gallant
ray gallant

Level 3 Expert

64299 Answers

Larry

Level 3 Expert

2800 Answers

Tom Chichester

Level 3 Expert

54195 Answers

Are you a Water Dispensing and Filtration Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...