Watches - Page 7 - Recent Questions, Troubleshooting & Support
Citizen eco-drive wr 200 manual
I'll need more information about the watch. WR200 is not the model number. It is the depth in metres it is water resistant to.
The serial number is usually engraved on the back plate of the watch. The bit against your skin when you're wearing it. It's the number marked in red in the photo I've attached. Is this a digital watch, a watch with hands or does it have both?
Comment below with the serial number and I'll try to help you more.
My timex watch changes the date at noon instead of
Hello,
This is because you have reversed am with pm.
Set your watch 12 hours back and the problem should be solved.
You might want to wait till midnight or noon to check it's fine.
Note: if you see the day shows the previous day rather than the present day, you have to set the clock 24h ahead.
Problem solved!
Silicon scientific atomic projection clock did no ...
I have one of these, and look for the manual on the 'Net every time DST changes, and eventually figure it out. Here's how: (1) Hold down the ALM/SET button until you get past the alarm setting and you see 24H or 12H. (2) Step through the settings by pushing the ALM/SET button, changing each as desired by pressing the +/CYCLE button. Eventually you'll wind up with the time zone indication flashing (it's really tiny, and appears just below the time indication). Press the +/CYCLE until you get to the desired time zone. (3) After the screen quits flashing, press the -/DST button to get the desired setting. I hope this helps, and that I can find this post again next time change!
11/9/2023 7:53:38 PM •
Watches
•
Answered
on Nov 09, 2023
How to change day in kadio kd 3806 wallclock
i do not know how to fix the time and the date and month in Kadio KD-3809 Digital Wall. Can you please help me? My son just lost the brosure and i am trying to fix it but I can not do it.
Thank you!
11/9/2023 5:17:29 PM •
Watches
•
Answered
on Nov 09, 2023
How do I set the time, does this watch take batteries?
You posted to Cameras category. I moved you to Watches.You asked the question"does this watch take batteries"?The watch that only you know what you have? You give no clue!They all take batteries unless it say 'Automatic' engraved on the back.
11/8/2023 6:04:45 AM •
Watches
•
Answered
on Nov 08, 2023
Need to adjust zero position
mcdevito75 here, Just a guess but here goes, start the chrono, now stop the chrono, the button you used to stop the chrono, press it again to retun to zero. Hope this helps.
11/6/2023 6:19:18 PM •
Watches
•
Answered
on Nov 06, 2023
My NTD2252-2057 won't come on and I don't have a remote
If your NTD2252-2057 TV isn't powering on and you don't have a remote, follow these steps:Verify the power source is connected and the outlet is functional.If the TV has a physical power button on the unit, try pressing it to turn the TV on.If the TV still doesn't turn on, consult the TV's manual for troubleshooting tips.Contact the manufacturer's customer support for assistance in diagnosing and resolving the issue if needed.
11/5/2023 4:02:12 PM •
The Watches
•
Answered
on Nov 05, 2023
How do you set the time on terner sport watch R1005M
To set the time on a Terner Sport watch R1005M, you'll typically need to:Press and hold the "Mode" or "Set" button until the watch enters the time-setting mode.Use the "Start" and "Stop" buttons to adjust the hours and minutes.Press the "Mode" or "Set" button again to save your settings.Please note that the specific steps might vary depending on the exact model of the watch, so it's a good idea to refer to the manufacturer's instructions provided with the watch for precise guidance.
11/5/2023 3:24:26 PM •
The Watches
•
Answered
on Nov 05, 2023
Not finding what you are looking for?