Washing Machines - Popular Questions, Answers, Tips & Manuals


The drum paddles are screwed from the outside of the bowl. To access them, you have to completely strip the machine and remove the wash bowl. The paddles are rarely available as a spare part. You may be able to repair it or remove it. This will affect the wash action to a certain extent if you take it out. Its a big job.

LG Washing... | 196 views | 2 helpful votes


The pump intake is clogged with blanket lint.

Washing Machines | 437 views | 1 helpful votes


It sounds like the suspension dampers need to be replaced. Lubricant wears away and when the plastic meet metal it will make those odd noises as tub sways to center itself. I recommend replacing all 4 suspension dampers.

LG Washing... | 115 views | 0 helpful votes


Probably a worn-out bearing; try rocking the empty drum by hand within the tub. If it is loose on the hub, discontinue use to avoid further serious damage, and get a service engineer to take a look.

Kenmore Washing... | 123 views | 1 helpful votes


Are you talking about one of the 7or 8 screws/bolts that hold the stator in place/ and one of them cannot be tightened to stay tight/

LG Washing... | 111 views | 1 helpful votes


could be seized bearings try manually turning the drum

LG Washing... | 124 views | 0 helpful votes


Check pump for restriction, undo cap at lower right hand side at the front and check for any foreign matter, make sure all water is out of the machine and put a towel on the floor

LG Washing... | 105 views | 0 helpful votes


LE is speed sensor error. Easy replacement. Check YouTube. Are you sure it isn't 'tE" error. Thermistor error. Very common. Videos also on repairclinic.com or appliancepartspros.com.

LG Washing... | 138 views | 0 helpful votes


Remove 2 screws at bottom of front panel. Lift panel from the bottom outward. Panel will drop down and out. Remove two screws under top to remove top

Maytag Washing... | 289 views | 1 helpful votes


The codes F5 and E3 indicate a lid lock issue. If unplugging it for several minutes then plugging it back in does not reset it the top of the washer needs to be removed and the lid lock replaced. https://producthelp.whirlpool.com/Laundry/Washers/Washer_Product_Assistance/VIDEO%3A_F5_E3_Error_Code_for_Top_Load_Washers

Whirlpool... | 208 views | 0 helpful votes


check drain hose if ok check pump

LG Washing... | 116 views | 0 helpful votes


i don't know. please check your purchase date. this link indicates a 3 year warranty.

https://www.oasiscoolers.com/index.php/onyx-countertop-pou.html

Washing Machines | 61 views | 0 helpful votes


Giantex would be a possible source.

Washing Machines | 120 views | 1 helpful votes


The dispenser may be clogged.

GE Washing... | 117 views | 1 helpful votes

Not finding what you are looking for?
Washing Machines Logo

258,204 questions posted

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...