Singhal Industries produces biohazard plastic bags with high-quality materials and stringent manufacturing standards to ensure durability and containment of hazardous materials. Their bags are specifically designed to meet industry regulations and ensure safe disposal practices.
AS far as I am aware and I have been in the trade for many years, there are limited spares for the Shark range and no schematics or diagrams due to their policy.
If it fails under warranty, they replace it, they don't attempt to repair them because it is not cost effective.
Question moved from Cars and trucks category.
Remove the base plate and remove the wheels and axle. Remove the hair and threads that was causing the wheel to lock up. You will need to use a box cutter or similar to remove the debris. Add a couple of drops of light machine oil and reassemble.
https://www.google.com/search?q=Eureka+Model+AS1104+wheel+not+turning
..
Would guess it is either worn motor brushes or overheating or both. When the brushes are worn, they glaze and get hot and then lose contact.
They are a great make and well worth getting repaired and serviced. I had one of the first ones in the UK mid 1970s I think.
https://nilfisk.23video.com/video/14138291/s2-s3-how-to-replace-carbon-brushesmp4S2 - S3 - how to replace carbon brushes.mp4
Nilfisk A/S
Mar 28, 2018
Nilfisk
http://www.advance-us.com > layouts > simpleparts
PDF
? All motors: Replace carbon brushes when shorter than 3/8" (9 5mm) to obtain the same motor efficiency as new brushes. Lubricating the Machine. Once a month, ...
86 pages
..
two faults, mainly battery.
A flashing blue light indicates that there is no power, please charge the battery. A flashing amber light indicates that there is no power or a temporary fault (e.g. too hot/cold). A flashing red light indicates that there is a fault, please call the Dyson Helpline.
To turn off the LED service light on your Aerus CentraLux central vacuum model E130J after replacing the motor, switch the blue box on the circuit board from "ON" to "MEDI."
Here are some troubleshooting steps you can try:
Check the clean water tank: Ensure that the clean water tank is not empty and is filled with warm tap water and the appropriate Bissell solution. The cap of the clean water tank should be properly closed.
Re-seat the water tank: Remove the clean water tank from the machine and then re-seat it back into the machine.
Check for clogs: There could be clogs in the system that are preventing the water from dispensing.
Check the pump motor: If the above steps don't work, there could be a more technical problem like a malfunctioning pump motor.
If these steps do not resolve the issue, it may be best to contact Bissell customer service or a professional for further assistance.
Bissell Carpet Cleaner Not Dispensing Water [SOLVED] (vacuupedia.net)
This is normally caused by leaving cleaning solution in the unit between uses. Either a bad pump (if it has one), stuck valve on the wand or a blocked nozzle. This is not a machine we know here in North America and is exclusive to South Africa.
https://www.google.com/search?q=WAP+VS600
..
We don't have any service centres at all! We are Fixya dot com. We are a peer to peer self help group. We don't sell anything, we only provide free information. Here are a few service centres in Bacor. If you need further help, click Comment under my answer. Let me know 'make model (what it is)'.
https://www.google.com/search?q=Bacoor%2C+Cavite+service+centre
..
Alot depends on the type of hose. There are plastic hoses and rubber hoses. Generally you can use a smaller plastic connector to connect two rubber hoses together and visa versa, Make sure it is a snug fix. You could also use an adhesive to keep it together.
This can be because you need to adjust the tension or probably the pulley is no longer aligned. So find out if the shaft is no longer straight also if the belt requires tension.
Take off the brush cover. Gently grip the sock with your fingers or a pair of pliers.
Pull the sock out in the direction opposite to the rotation of the roller brush.
If the sock is tightly wedged, you may need to wiggle it back and forth while pulling..
After removal, check for damage. If the brush bristles are bent or worn, consider replacing the roller brush.
Reassemble and Test following the manual instructions.
