Televison & Video - Page 6 - Popular Questions, Answers, Tips & Manuals
Why when i turn on my tv is the picture pink and negative like?
Potential causes and solutions:
High Contrast Mode:
Some TVs have a high contrast mode that can inadvertently cause the picture to appear negative or distorted.
Try this: Hold down the volume button on your Samsung TV remote and navigate to the settings related to contrast. Turn off the high contrast mode, and see if that resolves the issue.
HDMI Connection Issues:
A loose or faulty HDMI connection between your TV and an external device (such as a cable box, gaming console, or streaming device) can lead to color abnormalities.
Check the HDMI cable for damage and ensure it is securely plugged in. If necessary, try a different HDMI cable.
Additionally, an HDMI handshake failure during setup can cause color problems. Restarting both the TV and the connected device might help.
Picture Mode Settings:
Sometimes, the picture mode on your TV affects color accuracy. Modes like "Vivid" or "Dynamic" may exaggerate colors.
Switch to a more standard mode like "Standard" or "Cinema" to see if the pink tint disappears.
T-Con Board Issues (Specific to Some TVs):
If you have a Samsung TV, a polluted T-Con flat cable could be the culprit.
To address this, clean the contacts on the T-Con board using isopropyl alcohol. First, remove any dust. If unsure, consider seeking professional assistance
Why does my show green light then red light the whole time when i switched it on
It indicates that the TV is not receiving enough power to operate normally.
- The power cord or outlet might be faulty or loose. Try plugging the TV into a different outlet or using a different power cord. Make sure the cord is firmly connected to the TV and the outlet.
- The TV might have a blown fuse or capacitor. This would require opening the TV and replacing the damaged component. This is a risky and complicated procedure that should only be done by a qualified technician. Do not attempt to do this yourself unless you have the necessary skills and tools.
- The TV might have a software glitch. Try resetting the TV to its factory settings by following these steps:
- Turn off the TV and unplug it from the power source.
- Press and hold the power button on the TV for 10 seconds.
- Plug the TV back in and turn it on.
- If the TV shows a menu, select the option to restore factory settings. If the TV does not show a menu, repeat steps 1-3 until it does.
JVC 43" (109cm) HD Ready Plasma TV PD43N30A. Chunghop universal remote codes for JVC pd43n30a
Question edited for a lot more clarity, plus
Chunghop not chungCHOP :>D
JVC: 089, 161, 909
CHUNGHOP Universal Remote Control Codes
codesforuniversalremotes.com
https://codesforuniversalremotes.com > chunghop-univer...
Jul 25, 2019 -
CHUNGHOP Universal Remote Control Codes ; Aiwa: 009, 057, 058 ; Samsung: 618, 619, 620, 621 ; Philips: 013, 023, 024 ; Hisense: 676, 677, 707, 898
I NEED CODES FOR MY NEWSTAR NTR-B28Z FOR MY SONY TV
ChatGPT 3.5
User
I need code for newstar ntr b28z for my Sony tv
ChatGPT
Unfortunately, I can't provide specific code for your Sony TV remote without knowing the exact model number. However, you can usually find the code in the user manual of your Sony TV or by contacting Sony customer support. Alternatively, you can try using the auto-search feature on your newstar ntr b28z remote to find the correct code for your Sony TV.
User
need code for newstar ntr b28z
ChatGPT
To find the code for your Sony TV using the Newstar NTR B28Z remote, you can try these general steps:
Turn on your Sony TV.
Press and hold the "TV" button on your Newstar remote until it blinks twice.
Enter the code for Sony TVs. Some common Sony TV codes are: 0000, 0011, 0080, 0111, 1234. If none of these work, you can proceed to the next step.
Press the "Power" button on the Newstar remote. If the TV turns off, the code is correct. If not, try a different code.
Once you've found the correct code, press the "TV" button again to lock it in.
If none of the provided codes work, you might need to consult the manual of your Newstar remote or contact their customer support for assistance.
Not finding what you are looking for?