Televison & Video - Page 9 - Recent Questions, Troubleshooting & Support


Hi Matt, for what you say the internal power supply of the Combo Sansui, 110 volts a12v, is not working
Indicate model of Combo Sansui, which you are commenting on, in order to find the best possible solution
I wait your answer
Regards Franco Dosil
Hola Matt, por lo que comentas no esta funcionando la fuente de alimentacion interna del Combo Sansui, de 110 volts a12v
Indica modelo del Combo Sansui, del que estas comentando, para poder encontrar la mejor soluci?n posible
Espero tu respuesta
Saludos Franco Dosil

Sansui Televison... | Answered on Oct 14, 2019


open the rem.control and clean the keypads for bad contacts, oxide, corrosion, and dirty.
and try again.
if the problem persist, go to the repair shop TV for fix it.
God bless you

Sony Nsgmr1... | Answered on Oct 13, 2019


Hi Amit Sharma, try replacing the two fuses that don't work
Replace them with fuses OF THE SAME VALUE, if you put more amperage, you run the risk of damaging your Panasonic Plasma TV TH42PZ700U
If you do not respond, look for a specialized technical service
Greetings Franco Dosil

Hola Amit Sharma, pruebe reemplazar los dos fusibles que no funcionan
Reemplacelos por fusibles DEL MISMO VALOR, si pone de mayor amperaje, corre el riesgo d3e perjudicar mas su TV Panasonic Plasma TH42PZ700U
Si no responde, Busque un servicio tecnico especializado
Saludos Franco Dosil

Panasonic... | Answered on Oct 13, 2019


Not a complete solution, but, around the last page (pg. 14) of your converter box manual there are codes listed for universal remotes. I happen to have a Philips remote that is listed. My code to control my dtv box is 0354. It appears that they have all codes listed for all Radioshack model universal remotes. I would suggest getting a Radioshack remote for Your "Digital Stream" (Radioshack) dtv box...

GE JASRM24912... | Answered on Oct 13, 2019


Request it directly from Sanyo.

Sanyo Televison... | Answered on Oct 13, 2019


There isn't one. It appears that you do it electronically in set up using the Enter button.

https://www.youtube.com/watch?v=FJSYLm1RE8Q

Televison &... | Answered on Oct 13, 2019


Hi Norman Malkin, to adjust the brightness of your Samsung TV, you must enter Menu, select Image, display a list where Contrast Brightness Color and other parameters appear, select Brightness and increase or decrease the brightness to your liking, you may need make Color and Contrast adjustments
I hope you can adjust it
Greetings Franco Dosil

Hola Norman Malkin, para ajustar el brillo de tu TV Samsung, debe entrar en Menu, selecciona Imagen, de desplegara un listado donde te aparece Contraste Brillo Color y otros parametros, selecciona Brillo e incremente o disminuye el Brill hasta tu gusto, puede que necesites hacer ajustes de Color y Contraste
Espero lo puedas ajustar
Saludos Franco Dosil

Samsung... | Answered on Oct 13, 2019


Hi Dick Murawski, if you don't want to break anything on your Samsung TV, look for a specialized Samsung technical service
Greetings Franco Dosil

Hola Dick Murawski, si no quieres romper nada en tu TV Samsung, busca un servicio tecnico especializado de Samsung
Saludos Franco Dosil

Samsung... | Answered on Oct 13, 2019


Hi Nabadwip, indicate brand, model and type of equipment you are commenting on, in order to find the best possible solution
I wait your answer
Greetings Franco Dosil

Hola Nabadwip, indica marca, modelo y tipo de equipo del que estas comentando, para poder encontrar la mejor soluci?n posible
Espero tu respuesta
Saludos Franco Dosil

Televison &... | Answered on Oct 13, 2019


Main Board bad. The part number is A91F3-MPW S. Change this board fix the problem.

Magnavox... | Answered on Oct 13, 2019


Hi Arthur, indicate the brand and model of the TV you are commenting on, in order to find the best possible solution
I wait your answer
Greetings Franco Dosil

Hola Arthur, indica marca y modelo del TV que estas comentando, para poder encontrar la mejor soluci?n posible
Espero tu respuesta
Saludos Franco Dosil

Televison &... | Answered on Oct 13, 2019


Hi Merlyn Rudge, you can do a test to see if your remote control is broadcasting
Take your cell phone, put it in camera position and point the emitting LED of the remote control towards the camera and press any key, if the LED turns on, the remote control is emitting
I hope you can solve the problem
Greetings Franco Dosil
Hola Merlyn Rudge, puedes hacer una prueba para saber si tu control remoto esta emitiendo
Toma tu celular, ponlo en posicion de camara y apunta el Led emisor del control remoto hacia la camara y presiona cualquier tecla , si el LED se enciende, el control remoto esta emitiendo
Espero puedas resolver el problema
Saludos Franco Dosil

Televison &... | Answered on Oct 13, 2019

Not finding what you are looking for?
Televison & Video Logo

651,543 questions posted

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6029 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...