Televison & Video - Page 6 - Recent Questions, Troubleshooting & Support

The cable from the Direct TV box should go to the IN port on the receiver. The cable from the receiver OUT port should got to the TV.

Televison &... | Answered Yesterday

Most likely the main board...try locating one on Ebay, then go to you tube for a "how to replace" video.

Televison &... | Answered Yesterday

Most likely the power board. Try to find one on ebay, then go to you tube for a video of how to replace it.

Vizio Televison... | Answered Yesterday

Change the batteries...even if the remote will function for on/off, it may not have enough power to operate other functions.

Televison &... | Answered Yesterday

Most likely needs a main board. Check on ebay for the board and you tube for a video on how to replace it.

Vizio Televison... | Answered Yesterday

by wi fi or bluetouth or wifi spot.or by usb cable

Televison &... | Answered Yesterday

Hello here re some solutions that might help.

1) Check your internet connection or reboot your router.
2)If you are watching it on a tablet or phone try making sure there is no update.
3) Try installing then reinstalling the CBS app

I hope this works for you it usually works for me.

Televison &... | Answered Yesterday

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device./

Samsung... | Answered Yesterday

If the Blueray player is to connect to the internet you will need to enter your home network SSID and the Password. This is often found on a label on the router.

PLayers don't usually connect to the internet.

Televison &... | Answered Yesterday

Connection might be broken

Sony Televison &... | Answered Yesterday

It slides up from the bottom.
There is a oval indentation where your thumb goes,
press it upwards while using slight downward pressure.

Televison &... | Answered Yesterday

No you can't as it is a safety device to alert that the unit had just been switched on or altered. The inherent problem with induction tops is that there is no heat. Try touching your wedding ring on the surface when it is switched on and you will see what I mean.

There may be a controller on the motherboard to reduce the volume of the sounder, or you could put tape over it to reduce the sound.

Televison &... | Answered Yesterday

Not finding what you are looking for?
Televison & Video Logo

644,499 questions posted

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76016 Answers

Cindy Wells

Level 3 Expert

5719 Answers


Level 3 Expert

83843 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides