Science & Laboratory - Page 3 - Recent Questions, Troubleshooting & Support
Oce tds 600 error code
The Oce TDS 600 is a large format printer made by the company Oce. Error code 23501 on this printer typically indicates an issue with the printhead. The specific cause of the error and the solution will depend on the exact circumstances of the error. Some possible causes might include a clogged printhead, a malfunctioning printhead, or a problem with the printhead cable. It is recommended to check the user manual or contact Oce technical support for more specific troubleshooting steps.
Enigma 8 autoclave error code E13
The E13 error code on an Enigma 8 autoclave typically indicates a problem with the vacuum system. This error code is indicating that the vacuum is not reaching the proper level during the sterilization cycle.
Here are a few things you can check to fix the E13 error code:
- Check the vacuum pump: Make sure that the vacuum pump is functioning properly and that it is not blocked or clogged.
- Check the air filter: Make sure that the air filter is clean and not clogged. A clogged air filter can prevent the vacuum pump from functioning properly.
- Check the vacuum hose: Make sure that the vacuum hose is not damaged or disconnected.
- Check the door gasket: Make sure that the door gasket is not damaged or leaking. A damaged or leaking door gasket can prevent the vacuum from reaching the proper level.
- Check the control board: Make sure that the control board is not damaged or malfunctioning.
- Check the water level: Make sure that the water level is at the correct level in the autoclave chamber.
1/14/2023 10:21:30 PM •
Science &...
•
Answered
on Jan 14, 2023
I want to calibrate panther mettler toledo ptpn-1000x-023
To calibrate the Panther Metler Toledo PTPN-1000X-023 weight scale, you can follow these general steps:
- Turn on the scale and allow it to stabilize for a few minutes before use.
- Press the "Calibrate" button on the scale's control panel. If there is no "Calibrate" button, check the scale's manual for instructions on how to enter calibration mode.
- The scale will prompt you to place a known weight on the scale's platform. This weight should be within the scale's capacity and should be a weight that is used regularly in your process.
- Place the known weight on the scale's platform and wait for the scale to stabilize.
- Press the "Enter" button or follow the on-screen instructions to confirm that the weight is correct.
- The scale will perform a series of internal checks and may prompt you to repeat the process with different weights.
- Once calibration is complete, the scale will return to normal operation.
It's important to note that this is a general guide and the steps may vary depending on the specific model of your scale. Please refer to the instruction manual of your Panther Metler Toledo PTPN-1000X-023 scale for detailed instructions on how to calibrate it.
Additionally, it's important to ensure that the mixer is also properly calibrated and working correctly to ensure accurate measurement of your PVC material. It's recommended to contact the manufacturer or a professional technician for further assistance in case of any doubts or troubleshooting.
ZP 505 GREEN LIGHT BLINKING WILL NOT PRINT
If your Zebra ZP 505 thermal printer is not printing and the green light is blinking, it could indicate a problem with the printer's communication or connectivity. Here are a few steps you can try to troubleshoot the issue:
- Check the cable connections: Make sure that the printer is properly connected to your computer or network and that the cables are securely plugged in.
- Check the printer settings: Make sure that the printer is selected as the default printer on your computer and that the printer settings are configured correctly.
- Check for software updates: Make sure that you have the latest drivers and software for your printer installed on your computer.
- Check for any error message: If the printer is giving any error message, check the manual or search online to understand the error message and try to resolve it.
- Check the media: Make sure that the media is loaded correctly and that the printer has enough media to print.
- Power cycle: Unplug the printer and leave it unplugged for a few minutes then plug it back in.
If none of these steps resolve the issue, you may need to contact Zebra technical support for further assistance.
1/14/2023 1:42:23 AM •
Zebra...
•
Answered
on Jan 14, 2023
Corning Pc-320 hotplate/stirrer. Where can I get a manual?
Why do you need a manual there is nothing to do. To make the stirring function work, you need a magnetic stir bar (just a Teflon coated magnet. There is a motor-powered spinning magnet under the ceramic plate.
The heater is not thermostatically controlled. It just heats more as you turn the dial more.
I am getting an error 16 code on my Refrigerated Centrifuge Eppendorf 5702R
I fixed many of the Eppendorf 5702R with Error 16. It is caused by failure in the main frequency converter PCB. In every case, the failing component was different from the other. You will have to test it and replace few compartments. In simple, Error 16 means failure in communication between the control and frequency converter PCB's. Any failure in the main PCB that results in lower voltage will cause that error. I hope I have a simpler answer. i can help if you contact me.
[email protected]
or visit the company website: GreenBioMed.com
5/28/2022 1:31:19 AM •
Eppendorf...
•
Answered
on May 28, 2022
Not finding what you are looking for?