Retail Supplies - Page 8 - Recent Questions, Troubleshooting & Support
Casio TE-2400 not adding?
Replace the 3 x AA memory batteries. It needs those as they are the equivalent of the motherboard battery in a computer. The master reset button in normally hidden under the Cash Total or Sub Total buttons. Then go through the manual and do Basic Setup.
https://manualsdump.com/en/manuals/casio-te-2400/167513/11
It is a complex till and a lot to learn in 24 hours. A local Casio point of sale dealer could set it up for you in about 30 minutes and that is probably the best option.
..
My Sharp Cash Register (ER-A410) won't turn on in manager mode
Hi.
It is usually caused by a faulty or dirty mode switch. The first thing to try is squirting a bit of electrical lube down the key hole (WD40 or similar works fine), then turn the key back and forth a few times. Otherwise, the contacts inside the switch may have failed. I have also had a loose connector on the main board cause this in another model, so you could try pushing the connectors inside and make sure they are tight.
Hope this helps. You can set the void button to work in REG mode if you don't want to get the MGR mode fixed. Just let me know and I can look up the codes for you. You should be able to refund items as well (unless this has been set work in MGR mode also).
Mark
Sharp XE-A404, software download?
Try
http://www.manualnguide.com/download/manual-guide/sharp-xe-a404-cash-register-manual.html
and halfway down page of;
http://www.cashregisterstore.com/software.html
Casio TE-2400 cash register, how do I disable white keys that are not in use?
Additional information was forthcoming and is now provided as a partial answer to the Question
Additional Information
- John Zhang Jan 10, 2022
Ok, I have at least found the reason why I couldn't program white keys into "Subtotal", it was an error in my programming key sequence.
The transaction keys (i.e. Subtotal, CA, CH etc.) all needs to have a record No. 02, likewise all department keys needs to have a record No. 05 associated with them. I figured this one out by reading the report of key character programming (PGM - 4 - Subtotal - Subtotal).
So the correct programming key sequence to program a white key to "Subtotal" transaction key is:
PGM - 4 - Subtotal - 000 - Subtotal - 02075 - appropriate key - Subtotal
I still don't know how to disable keys that are not intended to be used.
Regards.
John
-
ADMIN Canada Jan 10, 2022 Delete
I don't want to put the answer down in the Answer Box as it will mark it as solved. What I would suggest is that you try and get hold of the dealer software. This allows you to Program via a Laptop Computer. It is a much easier interface. Or contact your local Casio dealer and ask what they would charge to come out and do it? I had my initial programming done this way, and it took the engineer less than an hour.
-
John Zhang Jan 10, 2022
And for some reason my answer post can be posted in multiple paragraphs, unlike my question post that was smashed into a single big paragraph!
-
John Zhang Jan 10, 2022
Thanks ADMIN Canada, I noticed the dealer software is called "CV10" but I have tried finding it from the Internet without success. I try to do it myself without getting the local Casio guys to come in.
-
ADMIN Canada Jan 10, 2022 Delete
$40 for software and the cable.
https://www.tecstore.co.uk/product_info....
-
John Zhang Jan 10, 2022
Thanks ADMIN Canada. At this stage I am finishing programming the cash register by following the dealer's manual. So getting the CV10 software is not pressingly needed, but thanks for the link.
BTW, you said you didn't want to put down your response as answer, how can you do that? The Fixya webpage doesn't have any "answer" button or similar link that allows me to answer my own question. All I could see from my question webpage are: Edit, Recategorize, Delete. And "add comment" link.
You can't answer your own Questions, but you can Edit and and add further information to the main question box as ANSWER: blah blah blah..
Which key should I use to run report Sam4s er5115ii
The X Key gives you a breakdown at any time of day and can be done as many times a day or a period that you like. All the totals remain. I did this in my bar when the day shift left and the night shift started. I replaced the cash drawer with a new float.
When you do the Z Reading, it gives you one last report and then zeros all the daily totals, and advances the Z read totals by one, and also leaves a cumulative Cash total to prevent *****.
How to delete previous owners info Sam4s er5115ii
You can't do that. Leaving the cumulative figures is to prevent F.R.A.U.D. You either do a Factory Reset and clear everything, or you leave it. The only remaining data is number of Z Readings and the Cumulative Cash Total.
Casio TE4000F journal help????
Check to see if the sprocket is turning. You may need a new printer unit. Also try pulling a piece of journal roll through manually as you press a sale.
Also it is not unknown for staff to sabotage the journal roll mechanism for thieving purposes and to stop the audit trail.
Not finding what you are looking for?