Retail Supplies - Page 4 - Recent Questions, Troubleshooting & Support
Verifone v240m bad mac problem please help
This means the Ingenico card machine has been disconnected by the bank (or the bank's systems have been updated which happens every 30 days) and you will need a simple "MAC reset" on the bank's system. A short call to a member of your banks support team will get this resolved and get the terminal back working.
How to reset grand totals on sharp xe a506 register?
X Readings just Read the Day.
Z Readings print the day and clear
BUT
The CUMULATIVE Readings always remain as an anti-***** feature and to help the tax man.
Normally, only a dealer can completely clear a machine to factory new settings. A button that hides under the Sub Total Key when the button cover is pried off.
IBM Toshiba SurePOS 4852-580 15 , cash register.
If an IBM Toshiba SurePOS 4852-580 15 cash register that you purchased used is not allowing you to make any changes and says "unauthorized," there could be a few possible causes:
- The cash register may be locked by a previous owner: The cash register may have been locked by the previous owner with a supervisor password. You will need to obtain the password to make changes.
- The software may be outdated: The software may be out of date and require an update. You will need to contact IBM for assistance with this.
- The system may have been tampered with: The cash register may have been tampered with, which could have caused the system to become locked and require a service technician to reset it.
- The cash register may have a security feature enabled: Some IBM Toshiba SurePOS have a security feature that allows only authorized users to make changes. You will need to contact IBM for assistance with this.
- The cash register may have an issue on the hardware: some issue on the hardware of the device could be preventing the device from functioning properly.
I HAVE A SAM4S 2000 POS, I DO NOT KNOW HOW TO GET THE SAM4S ELLIX 20 PRINTER TO PRINT CHECKS OR DAILY PRINT OUTS. I CAN TEST MY PRINTER AND IT WORKS...HOW DO I GET IT TO PRINT OUT MY SALES?
To get your SAM4S ELLIX 20 printer to print checks or daily printouts on your SAM4S 2000 POS system, you will need to perform the following steps:
- Make sure that the printer is properly connected to the POS system and that it is selected as the default printer in the software.
- Open the settings or configuration menu on the POS system and locate the section for printers.
- Select the SAM4S ELLIX 20 printer and configure it for check or daily printout printing. This may involve setting the paper size, print margins, and any other specific settings required for check printing.
- Save the changes you made in the printer settings.
- Print a test check or daily printout to make sure that the printer is working correctly. If the print is not correct, check the settings again and make any necessary adjustments.
If you are still having trouble with getting the printer to work, you may need to consult the user manual or reach out to the manufacturer for further assistance.
What Types Of Grants Are Available For Starting A Business?
Normally there are no grants available for starting a business. However, there are grants and different assistance available for business activities along with increasing your business enterprise, research and development, innovation and exporting.
Sharp ER A320 cash register has lost settings. How can we get the settings back?
If the Sharp ER-A320 cash register has lost its settings after being unplugged and plugged back in, you may need to reprogram the register. Here are some steps you can follow:
Consult the user manual: The user manual for the ER-A320 should have instructions for programming the register. If you don't have a physical copy of the manual, you can search for it online or contact Sharp customer support for assistance.
Check the backup battery: The ER-A320 has a backup battery that helps to retain the programming in case of a power outage or unplugging. If the battery is dead or weak, it may have contributed to the loss of settings. You can check the battery and replace it if necessary.
Reprogram the register: Using the manual or instructions provided by Sharp, you can reprogram the register with the necessary settings. This will likely involve resetting the register, entering your store information, setting up departments, programming PLUs, and setting up tax rates.
Test the register: Once the programming is complete, you should test the register to make sure it is functioning properly. You can perform test transactions and ensure that the correct receipts are printed and that the totals are correct.
If you are not comfortable reprogramming the register yourself, you can contact a Sharp authorized service center for assistance.
My AX-100 till is printing a whole days journal when I do the Z report at the end of the day.
It sounds like your till is currently set to print a full journal report as part of the Z report. To change this setting, you will need to access the programming mode on your till.
The N1-N8 values you mentioned are likely options within the programming mode that control various settings. Without knowing the specific model of your till, I can't provide exact instructions for how to access programming mode or which settings to adjust. However, you should be able to find this information in the user manual for your till.
Once you're in programming mode, look for options related to the Z report or end-of-day report. You may need to change the setting for "journal print" or something similar. If you're unsure which option to change, consult the user manual or contact the manufacturer for assistance.
Once you've made the necessary changes, exit programming mode and try running a Z report again to confirm that only the desired information is being printed.
Sharp XE 207b turns itself off
This can be a problem with the power supply. Try replacing the power supply with a new one. If that doesn't work, you may have an issue with the computer's internal components.
How do I get change that is hung up out for a Go 380 vending machine
Thank you for choosing Fixya, my name is Natalie and I can assist you with this.
I completely understand your frustration with change being stuck in the Go 380 vending machine. There should be a red return button on the right side of the front of the machine. If you push this in, your money should come out. If it does not, please call the number on the machine to inquire about a refund.
Not finding what you are looking for?