Lands Phones - Page 9 - Recent Questions, Troubleshooting & Support

Does this phone system have a central server? If so I would go check to see that it has power and came back up after the power outage. A lot of phone servers are on a battery backup and when the power goes out the software tells the server to shut down and then the UPS powers off.

Question edited for clarity and typo. No, only those phones, as they are part of a system. https://dcomcomputers.com/samsung-prostar-824-black-digital-phone/ ..

Contact Argos. Ask if they will replace or repair under warranty. They are cheaply made and not built for longevity. https://www.google.com/search?q=Binatone+1315 ..

The steps to delete auto attendant messages, including day/night mode, opening inbox, schedule 1, schedule 1 intervals A/B/C, will depend on the specific phone system or software you are using. However, here are some general steps you can follow: Access the auto attendant menu: This is usually done by dialing a specific extension or accessing the system through a web-based portal. Navigate to the message management section: This section may be labeled "Greetings," "Prompts," or "Recordings," depending on your system. Select the message you want to delete: This may involve listening to the message or selecting it from a list. Choose the delete option: This may involve pressing a button or selecting a menu option. Confirm the deletion: Some systems may require you to confirm the deletion before it is finalized. Repeat for all auto attendant messages you want to delete. It's important to note that deleting auto attendant messages may affect the functionality of your phone system

To turn off the second alarm on the RCA Digital PLL radio model RP3711A, follow these steps:

1. Press and hold the "Alarm 2" button on the top of the radio until the display shows "OFF."
2. Release the button.
3. Press the "Alarm Set" button to confirm that Alarm 2 has been turned off. The display should no longer show the time and alarm settings for Alarm 2.

If turning off Alarm 2 using the above steps doesn't work, you can try resetting the radio to its factory settings. To do this, follow these steps:

1. Unplug the radio from the power source.
2. Remove the backup battery from the radio.
3. Wait at least 30 minutes.
4. Reinsert the backup battery and plug the radio back in.
5. Set the time and alarm settings again.

Regarding the manual, the model RP3710 and RP3712 may have similar features and operation, but it's best to refer to the manual specifically designed for your radio model RP3711A to ensure that you are following the correct instructions. You can usually find the manual online by searching for the model number on the RCA website or on other electronic manual databases.

here is a link to instructions copy and paste https://cdn-media.vtechphones.com/products/CS/CS5119/CS5119-X_WEBCIB_V3_20160308.pdf

The instructions say you change them using the answer phone menu in the base - you need to scroll to 'answer delay' and you can increase the rings to a maximum of 8

Yes, the Panasonic KX-T7667 phone and the Panasonic KX-TES824 PBX are compatible. The KX-TES824 should be able to accommodate different handsets because it is made to work with a variety of Panasonic phones, including the KX-T7667 model. You must connect the KX-T7667 phone to an available extension port on the PBX and configure it with the proper parameters using the PBX programming software or a web interface in order to add the phone to your current PBX system. It's vital to keep in mind that the KX-T7667 is a proprietary phone made just for Panasonic PBX systems and might not work with other phone systems or third-party hardware.

To program the calls to go to the new location with the same extension number on a Nortel Networks T7316 phone, you will need to update the call routing information in the phone system's programming. Here are the steps you can follow:

1. Access the programming mode on the phone system. This typically involves entering a password or code on the phone's keypad.
2. Locate the call routing configuration for the extension in question. This may be in a menu for "extensions" or "call routing," depending on the specific phone system.
3. Edit the call routing information to reflect the new location of the extension. This may involve specifying a new phone number, a new group or queue, or a new set of forwarding rules.
4. Save the changes and exit the programming mode.

Once you have completed these steps, incoming calls should be routed to the new location of the extension, even though the extension number remains the same. Note that it may take some time for the changes to propagate through the phone system, so it is possible that calls may still go to the old location for a brief period of time after the changes are made.

Contact your telco. It is a feature supplied by them.

To save caller ID with a name in Panasonic KX-AT7730, you need to follow these steps: Press the "Program" button on the phone. Dial "9" to enter the "Caller ID" setting. Dial "1" to enter the "Caller ID Memory" setting. Dial the memory location number (0-99) where you want to save the caller ID and name. Enter the caller's phone number using the keypad. Press the "#" button to move to the next field. Enter the caller's name using the keypad (use the alphanumeric keys to enter letters). Press the "#" button again to save the entry. Repeat steps 4-8 for each caller ID you want to save. Note: Caller ID service must be enabled on your phone line for this feature to work. Also, make sure you have enough memory locations available in your phone's memory to save new caller IDs.

try to check the miss call feature if you have in menu.... some other panasonic have this

Since you didn't specify the model of your VTech DECT 6.0 phone I can't give you a definite answer, but many of them have a "mute" button on the handset. Enter the model of your phone into the search box here to download a copy of the manual.

The Uniden D-1680 system can have up to 12 handsets registered to the base. (The phone system was sold in bundles with 0 to 11 accessory handsets.) However, this cordless phone system has been discontinued. I can only find used DCX160 handsets (the compatible accessory handset) on Amazon and E-bay. I hope this helps. Cindy Wells

It sounds like there might be an issue with your Aria SOHO phone system's incoming call settings or configuration. Here are some steps you can try to troubleshoot the issue:

1. Check the volume settings: Make sure that the volume on your Aria SOHO phone system is turned up and not set to mute. You can do this by pressing the volume up button on the phone or checking the volume settings in the phone's menu.
2. Check the ringer settings: Make sure that the ringer is enabled for incoming calls. You can check this by accessing the phone's menu and looking for the ringer settings option. Make sure it is set to "On" or "Enabled."
3. Check the incoming call settings: Check the incoming call settings on your Aria SOHO phone system to ensure that calls from outside are set to ring through to your phone. This can usually be done by accessing the phone's menu and navigating to the call settings or call routing options.
4. Check the cables and connections: Make sure that all cables and connections between your Aria SOHO phone system and the outside phone line are secure and properly connected.
5. Restart the phone system: Try restarting your Aria SOHO phone system by unplugging it from the power source and plugging it back in after a few seconds. This can sometimes help reset the system and resolve any software or configuration issues.

If none of these steps work, you may need to contact a professional technician who is familiar with the Aria SOHO phone system to help diagnose and fix the issue.

It is possible that the outside lines have been blocked in the programming of the Samsung IDCS 28D system. You can try the following steps to unblock the outside lines:

1. On a phone that is working, press the TRANSFER button and dial 200.
2. Enter your system password. If you don't know your system password, you may need to contact your phone system administrator or service provider.
3. Press 713 for "Line Block Release".
4. Press the button for the line that is blocked (in your case, all 4 lines).
5. The display should show "RELEASE OK" for each line that is unblocked.
6. Hang up the phone.

If this doesn't work, it is possible that the phone system may need further troubleshooting or programming by a technician.

To unblock the outside lines on a Samsung IDCS 28D system, you can follow these steps:

1. Press the "Transfer" button on your phone.
2. Dial "741".
3. Press the "Transfer" button again.

This should unblock the outside lines on your system. If this does not work, you can try resetting the system by unplugging it for a few minutes and then plugging it back in. If the issue persists, you may need to contact a professional to troubleshoot the system further.

It's possible that when you cleared the forward on no answer, the voicemail setting on your Samsung iDCS 28D was not properly restored. Here are some troubleshooting steps you can try:

1. Check your voicemail settings: Dial 604 and press the "Speaker" button. Enter your extension number and press the "Speaker" button again. The system should confirm that you have entered the correct extension number. If it does not accept your extension, try dialing from a different phone to make sure that your extension is still active.
2. Verify your call routing: Dial 601 and press the "Speaker" button. This will show you the current call routing for your extension. Verify that "No Answer" is set to go to your voicemail box. If it is not, you can change it by pressing the "Speaker" button and entering the appropriate code for voicemail (usually "72").
3. Restart the phone system: If the above steps do not work, try restarting the phone system. You can do this by unplugging the power cable from the phone system for a few seconds and then plugging it back in.

If none of these steps resolve the issue, you may need to contact your phone system administrator or IT support for further assistance.

To reset the password on your Comdial 7260 00 voicemail, follow these steps:

1. Dial the voicemail extension from your phone.
2. When prompted, enter the default password. The default password is usually "0000" or "1234".
3. Follow the prompts to change your password. If you are not prompted to change your password, press "9" for the mailbox options menu, then "8" for the password menu.
4. Enter your new password when prompted. Make sure to choose a secure password that you can remember.
5. Confirm your new password when prompted.
6. Hang up the phone to save your changes.

If you are still having trouble resetting your password, you may need to contact your voicemail administrator or Comdial customer support for further assistance.

The issue with the *361 code not working on your Panasonic KX-TDA100 could be due to a few reasons:

1. The code may not be enabled in the DISA feature settings. You can check the DISA feature settings to ensure that the code is enabled for OGM recording.
2. The code may be conflicting with another code or feature on the system. Try using a different code for OGM recording, such as *38 or *391.
3. There may be a hardware or software issue with the system. In this case, you may need to contact Panasonic technical support or a certified technician to diagnose and resolve the issue.

It's also worth noting that different Panasonic phone systems may have different codes and settings for OGM recording, so be sure to consult the user manual or technical documentation for your specific model.