Food Mixers - Answered Questions & Fixed Issues
REPLACEMENT BEATERS FOR CAMFIELD POWER MIX
This is so weird. I have the exact same serial number for my Camfield mixer with the same model (I'm guessing from about 1955-57). I wonder if they just put the same serial number on for products created at the same time. I thought 6404 was really low. Did you ever find replacement beaters? Mine have rusted. This was my mother's mixer and I just have a fond place in my heart for it.
Globe SP62P stand mixer won't raise?
This is a commercial mixer and they are horrible to work on. Heavy and covered in thick grease. Probably lost a screw or sheared a shear pin. Call your catering equipment service guy.
2/15/2024 7:31:33 PM •
Globe Food...
•
Answered
on Feb 15, 2024
•
30 views
KitchenAid mixer ring falls off
The trim ring news to be ta]ed in place with a plastic-face mallet. This type of mallet does not (if used properly) Mar the surface it striks.
Hold the trim ring in place while tapping it in place. It often takes patience to get it right.
The ring is properly in place when there is no place where you can insert a fingernail between it and the mixer body all around the ring.
Kitchenaid Artisan Stand Mixer has stuck hub bevel gear (KSM150PS)
The bevel gear sits above the worm-follower gear. I think you mean the drive attachment gear.I think I have the same, or similar problem. I ground a piece of meat that stopped it from working. The drive-attachment-gear turns if I push it in, but then it pops out. I am still trying to figure out what part is causing the issue - the drive attachment gear, or maybe even the worm follower gear.
12/31/2023 6:51:22 AM •
KitchenAid...
•
Answered
on Dec 31, 2023
•
1,034 views
Not finding what you are looking for?