Medical - Page 3 - Recent Questions, Troubleshooting & Support

https://www.medwrench.com/thread/157304/how-can-i-disassemble-a-hill-rom-advanta-bed https://www.medwrench.com/equipment/1030/hill-rom-advanta (Service manual above may help but be careful.) Different brand youtube video: https://www.youtube.com/watch?v=x6tjGZKG68A

https://www.mayoclinic.org/diseases-conditions/bakers-cyst/diagnosis-treatment/drc-20369955

its medical device not a computer, moved you. all you can do is charge the battery up for 24hours and pray it works if not it needs service, just like all complex tech needs , sooner or later. call them maker yet> be wise that, for sure med devices.

Try rebooting the machine 70@;then flush the print head. If it still doesn't print you will have to replace the head. There are some online companies that can guarantee to flush it.

generically, look for report formating settings / configuration options to see which parts/ kinds of data are included/ enabled for printouts


tech6789

Ekg machines print on thermal paper, This means that the impression is made by the print head heating the paper. If the print head is not making contact with the paper, you will get a faint tracing or no tracing at all. This needs to be adjust by a technician. Contec is located in China and we are a dealer. If you need their info or want us to look at it for you (for free) simply give us a callDiscount Cardiology805-484-9985

Not a medical (equipment) question. Try electronics / audio equip. ... p.s. try validating whether your system is in the correct mode for responding to the mic's switch; (2) ohm out the conntacts on the end of the mic-cord's plug, and verify the switch is responsive, and that the mic's coil has continuity. (3) check manufacturures web site for user's manual , and chech for proper setings / user interaction / system requirements ; verses damaged equipment. . . . .

best of luck,
M.

re; T-2000 , Marquette, ecg stress test treadmill -

I work with these quite frequently. A few questions:

1. what is your application for this treadmill?

2. which system/device/equipment are you using to control the treadmill, and which control & communications cable are you using - and which port is this cable connected to ??

3. which version/ manufacture date/ serial #/ firmware revision do you have there?

4. have you ever operated one of these system when it was properly working before?

5. which CAM module do you have? ....

... post pictures also, if you can.


(tech6789).

https://www.google.com/search?q=cephlaxine&ie=UTF-8&oe=UTF-8&hl=en&client=safari

Ok, so it's posting which means that the startup systems are working but the OS isn't taking the hand-off. Check for a tiny reset button on the back and if it's there try pressing it for a few seconds to see if that helps. Now having said that, since it is a medical device, I strongly recommend contacting the customer service line of the company that makes it if the reset isn't an option.

I'm no Doctor so be advised of that, I've done the same thing before and it's no issue. It's just the medicine giving him a weird feeling, maybe it's numb or has a burning or tingling sensation but it's nothing to worry about. Tell him he'll be fine and give him something to drink(or eat, or both) and it'll "wash" the bad taste/feeling away.

You've been in pain for a while. It hurts to walk, sit down and get out of a chair, and even to simply lean over. In fact, your hip even hurtswhen you're just sitting or lying down. So you've decided to move forward with hip replacement surgery. One reason people are hesitant to move forward with this surgery, as with most surgeries, is not knowing what to expect after you wake up from surgery. To quell your worries, here's a breakdown of what you can expect to happen after your hip replacement surgery. 1) Recovery begins immediately As soon as your surgeon completes the surgery, your recovery begins by walking the same day as surgery. 2) Physical therapy is your new hip's best friend 3) Getting active

https://sterilizers.com/Amsco-Steris-Manuals.asp

https://manualslibrary.org/info/manuals-single-takeout-auto/?source=gs-ca&kw=vacuum+%2Bmanual&c=ManualsLibrary_Category_CA_Blended&aid=1635021357&network=s&keyword=vacuum+%2Bmanual&placement=&gclid=EAIaIQobChMImJycwrj04AIVcxh9Ch2iuwQNEAAYASAAEgKpyPD_BwE The above is a link for a free manual where you can find what the error code 8 is directed towards in the operation of the autoclave.

These are the recommended brands: Philips, AED and Heartstart

The price range is $1200 to $1600 for a mid grade model.

hi,
check the patient cable. if there is any break ( inside ) in the lead it will this problem can occur. also check is the patient cable properly inserted in the socket or not.
if any lead is broken the ecg will not print, also show interference in the display.
try to change the patient cable.
ok

Folic acid helps your body produce and maintain new cells, and also helps prevent changes to DNA that may lead to cancer. As a medication, folic acid is used to treat folic acid deficiency and certain types of anemia (lack of red blood cells) caused by folic acid deficiency.Jan 4, 2019
Generic Name: folic acid (FOE lik AS id)
Store: folic acid at room temperature away from moisture and heat.
Infant: 0.1 mg orally, intramuscularly, subcutaneously or IV once a day.

My Dear, try to find a self help group in your area, in the subject that relates to you , or if you can afford it see a therapists. It is very difficult and painful to come to terms with childhood trauma, but be STRONG and Confident ,that you will do it. Keep telling yourself I AM NOT MY PARENTS! and REPEAT, I SHARE no blame. Do not allow them to continue to have power over how you feel. You are an adult now, and the child in the past is no longer you. You could also join a volunteer group to help others like yourself as you know what they are going through. Whatever you do, keep your chin up, you will make it through. Much love and happiness to you day by day.

Try contacting the manufacturer, they usually have spares. :-)