Measuring Tools & Sensors - Page 5 - Recent Questions, Troubleshooting & Support
Is the Swanson 8
the t bevel is good for replicating any angle. Been a carpenter for 20 plus years and the tool is priceless
How do I calibrate the scale on Robinair 34288?
To calibrate the scale on Robinair 34288, follow these steps:
- Turn off the machine and make sure that the scale is empty.
- Press and hold the "Weight" button for three seconds until "CAL" appears on the display.
- Place a weight of known mass (such as a 50-pound weight) onto the scale and press the "Weight" button. The display will show the weight that you placed on the scale.
- Press the "Weight" button again to confirm the weight. The display will show "CAL END" to indicate that the calibration is complete.
- Remove the weight from the scale and turn the machine back on.
Your Robinair 34288 scale should now be calibrated and ready to use. If you have any issues or concerns, please consult the user manual or contact Robinair customer support.
4/28/2023 5:22:01 AM •
Robinair...
•
Answered
on Apr 28, 2023
Please can I have assistance on the recalibration of my super pro miosture meter. The machine is measuring 2 % higher then it should on maize
Sure, I'd be happy to help you recalibrate your Super Pro moisture meter. Here are the steps you can follow:
- Find a reference sample: You will need a sample of maize that has a known moisture content that is different from the current reading on your moisture meter. You can either purchase a certified reference sample or make your own by drying a sample of maize in an oven or using a moisture analyzer.
- Adjust the calibration: Turn on your Super Pro moisture meter and press the "calibrate" button. Using the reference sample, adjust the calibration of the moisture meter by adding or subtracting the required percentage points to match the known moisture content of the reference sample. For example, if the reference sample has a moisture content of 14% and your moisture meter is reading 16%, you will need to subtract 2% from the calibration.
- Verify the calibration: After adjusting the calibration, test the moisture meter again using the reference sample to verify that the readings match the known moisture content. If the readings do not match, adjust the calibration again until you get an accurate reading.
- Document the calibration: Once you have verified the calibration, document the adjustments you made and the reference sample used for future reference.
It's important to note that different types of maize can have different calibration requirements, so it's a good idea to recalibrate your moisture meter regularly and for different types of maize samples. You can also refer to the manufacturer's instructions for specific calibration procedures for your Super Pro moisture meter.
Not finding what you are looking for?