Cooktops - Page 5 - Recent Questions, Troubleshooting & Support
MODEL JEC9530 CUSTOM CONTROL ELEMENT TURNS OFF
i would start with the infinite switch itself
you can find this part at appliance parts pro one word dot come
type in your model number
your looking for part number
AP400965 they are currently in stock
unfortunatley it is expensive around 150.00
tell them your a servicer
working for myyellowdog
it may get you a discount
have a great day
4/7/2022 7:14:48 PM •
Jenn-Air...
•
Answered
on Apr 07, 2022
I have a 5 burner Dacor Cooktop (SGM365) with
In the middle of each burner, there is a small brass ring that screws in the burner. If you unscrew all five and pull the knobs, the top should come off. From there you can access the electronics. Because all the burners ignite at the same time, I would suspect either a disconnected or shorted wire on your right burner or some corrosion has occurred at that burner preventing it from grounding properly.
Miele HR1124 cooktop - turning one burner on keeps igniter clicking for all 4 burners.
It is a gas appliance and it is a Miele, so you need a registered gas technician to service it. In my experience, the spark igniters work on all burners. To clean the burners, remove them all and put them in a large saucepan. Add cold water and dish liquid, bring slowly to a simmer and turn off. When cold, rinse and scrub with a plastic pot brush, paying particular attention to holes and slots. This was a job we did in the restaurant every week. It is a good plan to do before you go to bed for the least disruption.
The product specs says;
Automatic re-ignition
•
Sealed burners
•
M Pro Dual Stacked Burner System
So perhaps my hack won't work if they aren't removable.
I found this video :>)
https://blog.yaleappliance.com/new-miele-hr1124-30-inch-professional-gas-range
..
Control knob doesnt adjust flame height?
Use a manometer to insure lp gas pressure is correct. The regulator for the stove may need adjusting. The air mixture adjustment may not be correct for PL as well.
How to clean clogged cast iron burners
I would avoid soaking them as they should be kept dry. I would try pipe cleaners in the holes or if too large start with a steel blow lamp nozzle cleaner, (short piece of guitar B string).
2/6/2022 5:01:55 PM •
Cooktops
•
Answered
on Feb 06, 2022
Not finding what you are looking for?