Home Fencing - Page 2 - Recent Questions, Troubleshooting & Support
I am having trouble with my Elite CSW-200-UL gate on my driveway. It has randomly been responding to the remotes and then I had to punch in the code to make it work. Now it is not responding.
The first place to look is your receiver. This is the device, often separate from the actual gate operator, that responds to your transmitter. Stand next to the gate operator and you should hear a small click coming from the receiver when you or someone else pushes the button.
You can sometimes find the receiver by following the antenna cable back to it. If it does not have an external antenna, look inside the operator box for either an antenna screwed into the receiver or a wire hanging from a plastic box.
If you hear the click and the gate does not open, the possibilities grow exponentially so we won't try to address every possibility here. If you hear a click when you are close, but not when the transmitter is triggered at a distance, check the antenna.
If you don't hear the click, then either the remote has lost programming (this often happens with rolling codes transmitters when they are not used for a long time), or the receiver is not working.
Check to make sure the receiver is getting plenty of power power using a meter. It should read at the recommended voltage or a bit higher. Usually around 24 volts but some receivers can work down to 12 volts. If it gets plenty of power and the remotes have been programmed back in, consider replacing the receiver.
3/8/2019 12:26:58 AM •
Home Fencing
•
Answered
on Mar 08, 2019
How to refill fluid
interesting question. now, if only we could also know what pump does not pump, what fluid you are refilling, a good answer would be able to be provided.
Headlights not working
take it to a competent mechanic for assistance. If you don't know what it means, then you aren't qualified to work on it either.
Valve adjustment specs
that could be dependent on the engine. BUT, since you didn't tell anyone, it is impossible to give you a concise answer. anyway, once you decide what engine, look it up yourself on the internet rather than take someone's word for it.
setting that clearance adjustment could be really important for engine life.
10/19/2018 12:35:41 AM •
Hino 2006 268
•
Answered
on Oct 19, 2018
Lost manual
Get a new one. likely, you can download it from the internet, IF, and only IF you happen to know what the equipment happens to be that you need a replacement manual for.........
How to install a fence?
These days' people are becoming very much self-dependent, and as a result, they do a lot of things by themselves. One such thing that people do quite commonly these days is fencing. They love to install their own fences, but it is important that you do it the right way. You must also be aware of when you should and shouldn't put up a fence. This will prevent you from facing legal consequences. Getting back to the point, 5 simple steps are involved in installing a fence. The first step is to determine the poles for fence posts. You have to be careful when you are placing the post. Make sure you have dug the holes deep enough to avoid accidents. Then attach rails to the fence post and the last step is to
install the fence boards. You can also take a look at to know more information.
Not finding what you are looking for?
