Heating & Cooling - Page 7 - Recent Questions, Troubleshooting & Support
What is name and address and phone contact customer service of del-rain?
Private Company, Headquarters Location
4808 Wilton Ave., Niagara Falls NY 14304-2145, United States
(716)283-0060, Primary SIC: Heating Equipment, Except Electric, Primary NAICS: Heating Equipment (except Electric and Warm Air Furnaces) Manufacturing
Description: Heating Equipment, Except Electric
Hope this helps :)
The fan is operating on my Model 1500 V portable
Most of these heaters are not worth the price of repairing.You will spend more on labor then a new heater will cost. One thing you can try is to shut switch off on the heater and turn the thermostat to high then unplug unit for 10 mins. Plug back in and turn on. Some of these heaters will reset by doing this.It may not help but it costs nothing to try. Hope this helps you. Thanks
I have a thermoheat RMC-KFA75TL/125TL i tried to
I had the same issue. Pull the pressure gauge off then there is four Phillips head screws to remove the air outlet filter. It is probably stopped up with some stuff. I used brake cleaner and washed mine out but they recommended replacing it.
1/21/2024 3:48:23 PM •
Heating &...
•
Answered
on Jan 21, 2024
Procom Model SSD24TB Serial 4359689. Dual Regulator part number RV83FI (L) (S) from manual, is that RV83FI.6.10 or RV83FI.4.9?
- The dual regulator part number RV83FI and the Procom Model SSD24TB Serial 4359689 are not unique to the current knowledge upgrade. Consult the Procom user handbook or get in touch with Procom customer care to find the appropriate replacement part. Comprehensive information regarding compatible replacement parts should be included in the handbook. Examine the markings on the regulator for part numbers or specs, if any. If in doubt, get advice from a licensed service provider or a competent technician. Using the wrong part might cause problems with performance and raise safety risks. This answer is predicated on data as of January 2022.
What are E4 and F4 codes mean
On your Whirlpool drier;
A "F4E4" (Low or No Line Voltage) code indicates there may be a problem with your home power supply, keeping the dryer's heater from turning on. The dryer will continue to run when this diagnostic code is present. Touch any pad to clear the code from the display and return to the estimated time remaining.
1/20/2024 7:56:28 AM •
Heating &...
•
Answered
on Jan 20, 2024
I have error code ch 09 displaying on my
The error codes are not all the same. They are different for different models.
THIS IS NOT A SOLUTION....
This is a "Clarification request"
Can you please locate and post your LG model number here so we can help you properly and professionally.
Furnace burner lights turn fan on burner goes out. MGHB-056ABFC-09
This could be due to a variety of reasons such as a faulty thermocouple, a blocked flue, or a malfunctioning gas valve.
To diagnose the issue, I recommend contacting a licensed HVAC technician who can inspect your furnace and provide a solution. In the meantime, you can try checking whether the fan is switched "ON" on the thermostat. If so, it should come on automatically when the burners are lit.
1/19/2024 3:30:21 AM •
Heating &...
•
Answered
on Jan 19, 2024
E3 error on LIfesmart heater
Even after replacing thermostat and motherboard offered from company, my heater would trigger e3 error code and shut off. After several (maybe 100!) different attempts to plug in and operate, here is what worked for me!
Depress the power button on the heater while plugging in to wall circuit. Continuously depress power button. It will run through a test cycle and attempt to start. Keep depressing the power button as the heater tries to start, then shuts down with e3 error. While the power button is still depressed, unplug the unit from the wall. When I plug back in the wall the E3 error is gone. Good luck
1/18/2024 5:19:48 AM •
Lifesmart...
•
Answered
on Jan 18, 2024
I have a reddy heater pro 110 that runs fine for a few minutes then dies. The pump is at 5 psi where it is supposed to be . It has new filters and nozzle. What else could it be ?
Here are some possible causes and solutions:
Insufficient fuel supply: If the fuel supply is not sufficient, the heater may shut off. Check the fuel tank and make sure it is full. If the fuel tank is full, check the fuel line for any blockages or leaks. If you find any issues, repair or replace the fuel line.
Dirty fuel filter: A dirty fuel filter can cause the heater to shut off. Check the fuel filter and clean or replace it if necessary.
Faulty photocell: The photocell is responsible for detecting the flame. If the photocell is dirty or faulty, the heater may shut off. Clean the photocell with a soft cloth and check if the heater works properly. If the problem persists, replace the photocell.
Defective motor: If the motor is defective, the heater may shut off. Check the motor and replace it if necessary.
Broken ignition system: If the ignition system is broken, the heater may shut off. Check the ignition system and replace it if necessary.
As you have covered some other possibilities, if the above doesn't offer relief, you may have to consult a professional technician or contact the manufacturer.
LG air conditioner
You have to try resetting the system. First turn the breaker off for the condenser and wait about 20 seconds. After you turn it back on the system should reset. Also What is the model of your air conditioner. With out that information i cant help you with your ac repair problem
Check us out online at
AC Service Delray Beach Fl
Not finding what you are looking for?
