Freezers - Page 4 - Recent Questions, Troubleshooting & Support
Can i leave igloo ice machine when it is full
Yes, it is safe to leave an Igloo ice machine when it is full. However, if you plan to leave the ice in the machine for an extended period, it is recommended to transfer the ice to a freezer to prevent melting and refreezing, which can cause the ice to clump together.
2/14/2023 12:11:25 PM •
Freezers
•
Answered
on Feb 14, 2023
My frgidaire chest freezer model # MFC07M3FW2 will not come on after short move. Plugged back in and light will not even come on
If your Frigidaire chest freezer is not turning on after a short move and the light is not even coming on, there may be a few things that could be causing this issue:
- Check the power source: Make sure that the freezer is properly plugged in and the outlet is receiving power. You can try plugging another device into the same outlet to confirm if it's working or not.
- Check the power cord: Check to see if the power cord is damaged or frayed. If it is, it may need to be replaced.
- Check the control board: There may be an issue with the control board of the freezer. Try unplugging the freezer for a few minutes and then plugging it back in. This can sometimes reset the control board.
- Check the compressor: If the compressor is not functioning properly, the freezer will not cool. You may need to contact a professional to repair or replace the compressor.
If none of these solutions work, it may be best to contact a professional to diagnose and fix the issue.
2/14/2023 12:09:38 PM •
Freezers
•
Answered
on Feb 14, 2023
My igloo model frw062 stoped cooling
If your igloo model frw062 has stopped cooling, there are a few possible reasons why this might be happening:
- The temperature control could be malfunctioning: If the temperature control is not working properly, it could be causing the refrigerator to run continuously and not cool properly.
- The condenser coils could be dirty: Over time, the condenser coils can become dirty, which can cause them to overheat and reduce the cooling efficiency of the refrigerator.
- The compressor could be failing: The compressor is responsible for compressing the refrigerant and pumping it through the system. If the compressor is failing, it may not be able to do its job effectively, which could result in poor cooling performance.
- The refrigerant could be leaking: If the refrigerant is leaking from the system, the refrigerator will not be able to cool properly.
To fix the issue, you may need to troubleshoot the refrigerator and try to determine the cause of the problem. If you are unable to identify the issue, it may be best to contact a professional for assistance.
2/14/2023 12:08:28 PM •
Freezers
•
Answered
on Feb 14, 2023
Red light flashing on tall freezer, temp down to -6
A flashing red light on a tall freezer indicates that the appliance has detected a temperature alarm, and the temperature inside the freezer has likely dropped below the desired range. A temperature of -6 degrees Celsius is much lower than the recommended temperature for a freezer (-18 degrees Celsius), which can cause frozen food to become damaged or spoiled.
To resolve the issue, you should first check the freezer's manual for troubleshooting tips and recommended actions. In general, you may need to adjust the thermostat to a higher temperature, remove any obstructions to airflow, or defrost the freezer if ice buildup is blocking the evaporator coils. If the issue persists, you should contact a qualified technician to diagnose and repair the freezer.
2/14/2023 12:06:30 PM •
Freezers
•
Answered
on Feb 14, 2023
When should you use SUPER byutton on Skandiluxe chest freezer
The SUPER button on a Skandiluxe chest freezer is typically used when you need to freeze food quickly, such as when you've just added a large amount of unfrozen food to the freezer. The SUPER function causes the freezer to operate at its coldest temperature for a period of time, which helps to freeze the food more quickly. After the desired amount of time, you can turn off the SUPER function to return the freezer to its normal operating mode.
2/14/2023 8:26:17 AM •
Freezers
•
Answered
on Feb 14, 2023
Loud noise when I turn on my 102c igloo portable ice maker
A loud noise when turning on an Igloo portable ice maker could indicate a problem with the compressor or a malfunctioning fan. It is recommended to unplug the appliance and have it inspected and repaired by a qualified technician.
2/14/2023 8:24:59 AM •
Freezers
•
Answered
on Feb 14, 2023
For Westinghouse fj383 freezer where is the defrost timer located
The defrost timer in a Westinghouse fj383 freezer is typically located at the back of the unit, near the compressor. It may be behind a cover or housing that needs to be removed in order to access the timer. If you're unsure about locating the defrost timer or don't feel comfortable working on your freezer, it's best to consult the user manual or contact a professional technician for assistance.
2/14/2023 8:24:10 AM •
Freezers
•
Answered
on Feb 14, 2023
Where is the 9V battery located on a Kenmore upright freezer model 970
The location of the 9V battery on a Kenmore upright freezer model 970 can vary depending on the specific model and design. However, in general, the 9V battery is typically located in the control panel or on the back of the freezer near the compressor. You may need to consult the freezer's manual or contact Kenmore customer support for more specific information regarding your model.
Hoshizaki F-450maf has no water in reservoir tank
If the Hoshizaki F-450maf ice machine's reservoir tank has no water, you should first check that the machine is properly connected to a water supply and that the water supply valve is turned on. You should also check that the machine's water filter is clean and not clogged. Additionally, make sure that the float switch is functioning properly and that it is not stuck in the "off" position. If these steps do not resolve the issue, you may need to consult the machine's manual or contact a professional for further assistance.
2/14/2023 8:15:39 AM •
Hoshizaki...
•
Answered
on Feb 14, 2023
I have a Brada mf 183 upright freezer. The fast freeze light will not go out. How do you get the green power light to come on?
To get the green power light to come on for a Brada mf 183 upright freezer, you should first make sure that the freezer is plugged in and that the outlet is functioning properly. If the outlet is working correctly, try resetting the freezer by unplugging it for several minutes and then plugging it back in. If the fast freeze light is still on, it may indicate an issue with the temperature control or sensor, and it may be necessary to contact a professional for repair or replacement.
2/14/2023 6:50:59 AM •
Freezers
•
Answered
on Feb 14, 2023
How to access/open the No-Frost System located on top of my Miele tall freezer F7462 SNH-1 ?
To access the No-Frost System located on top of your Miele tall freezer F7462 SNH-1, follow these steps:
- Unplug the freezer and remove all items from the freezer compartment.
- Locate the air grille on the top of the freezer.
- Remove the air grille by pulling it upwards from the front edge.
- You should now be able to see the No-Frost System behind the air grille.
- Use a soft-bristled brush or a vacuum cleaner to remove any dust or debris from the No-Frost System.
- Once you have finished cleaning, replace the air grille by pushing it back into place.
Note: If you are not comfortable accessing the No-Frost System on your own, it is recommended to consult the Miele customer service or a professional technician for assistance.
HOSHIZAKI MODULAR FLAKER IS TRIPPING 1A FUSES WHEN TURN ON THE SWITCH.
Question edited for typo.
Question moved from Washing Machines Category.
Please don't type in all CAPS, it is considered SHOUTING and rude, plus harder to read.
You have a dead short to earth. Strip off all the panels and look for water where it shouldn't be and chaffed cables especially near holes in the casing. If you can't find anything, you need to check individual items, compressor, pump, and grinder with a multimeter. Or just call for service.
2/8/2023 4:06:01 AM •
Hoshizaki...
•
Answered
on Feb 08, 2023
Not finding what you are looking for?