Drills - Page 7 - Recent Questions, Troubleshooting & Support
I have a Hilti TE17 (some 40 years old), limited
You can use an AW46 Hydraulic oil. Do not put more than 35cc of oil in tool if you just poured out the old oil. You can put 50cc if you washed the housing out. Too much oil takes out the cushing of air between pistons. You will break the connecting rod or strip the gears. If you take the cap off of the top of the gear housing, older ones will be black. Newer ones had a red cap indicating that there was a clutch and see and it still looks wet with oil then I would not mess with it.
11/12/2022 3:59:16 PM •
Drills
•
Answered
on Nov 12, 2022
Makita electric drill
the header lists 2 different tools but if you give me the model number I will find a cord set for you and the wiring diagram that you need. If you also give me the area (US only) I will try and find someone local that has what you need.
ION Block Party speaker won't work on battery
Hi,
depending on the age of your device, it might be time to switch the battery of the product if the current battery isn't strong enough to hold a charge. Thank you.
9/30/2022 1:27:50 AM •
Drills
•
Answered
on Sep 30, 2022
Electric Makita HP2051 chuck won't close
I don't really know how a chuck works. I use them often on a drill press, cordless drills, etc. My grandfather always said to "check the simple things first." Could something have gotten in the way like saw dust, dirt.....? ? I might suggest trying using compressed air and blow it out? You can buy a can of compressed air at office depot.
Not finding what you are looking for?