Radio Communications - Page 6 - Recent Questions, Troubleshooting & Support
Does genesis model number G-608 digital series are they Bluetooth compatible?
According to Specifications IT IS NOT BLUETOOTH compatible. Please see spec:
Specifications:
2000 Watts total system power
5.1 AV Receiver
500 Watts Sub
1500 Watts Stellite and center
10" Long Throw Active Driver
Digital Audio Video Input, Digital Output
Digital AM/FM LCD Display
2 Blue Power Watt Meters
Pure Piano Black Lacquer Finish
Plug and Play IPod, MP3, DVD, CD, HD-TV compatible
Bass, Treble, Full Function Remote Control
6/12/2023 7:11:19 PM •
Radio...
•
Answered
on Jun 12, 2023
Hi, my UH036SX-2 Receivers do
turn up the volume, turn the squelch until it is hissing, slowy turn it back until it stops hissing, scanning should resume.
How i get a pass code for pairing Bluetooth on my PLYE HYBRID AMPLIFIER P2002ABTI
To obtain the passcode for pairing Bluetooth on your Pyle Hybrid Amplifier P2002ABTI, you will need to refer to the user manual or documentation that came with the amplifier. The passcode or PIN for Bluetooth pairing is typically specified in the manual, as it can vary depending on the manufacturer or model.
If you don't have access to the manual or cannot locate the passcode information, you can try some common default passcodes such as "0000" or "1234," as these are often used as default codes for Bluetooth devices. However, it's important to note that these default passcodes might not work for your specific amplifier model.
If none of the above options work, I recommend reaching out to Pyle's customer support directly. They should be able to provide you with the correct passcode or guide you through the pairing process for your Pyle Hybrid Amplifier P2002ABTI.
5/18/2023 2:27:20 PM •
Radio...
•
Answered
on May 18, 2023
I have a problem with an Alinco-135 UK blowing inline fuses when I connect to a battery.fuses
10meter radio transcievers
Alinco DR-135UK 25.000-29.90 MHz (programmable) - needs ALINCO ERW-10.Ham radio?
0-25 Watt USB/LSB (variable)
not transmitting it blows fuse. right>?
bad caps inside shorted too cause
or bad DC power regulator )
assumes using right sized fuse. answers.
it does need service,
if blows only TX mode, antenna good.
the fuse needs more amps to TX 25times more
12amp min, 15amp fuse or 20.
one model said 15amp fuse. DR135, books on UK version not easy to find ask maker , they have vast manuals I see
http://www.alinco.com/pdffiles/
5/7/2023 10:10:42 PM •
ICOM...
•
Answered
on May 07, 2023
My iLive IBB313 bluetooth boombox won't charge
First off I have had one of these for almost a decade now...a very reliable item.
Most likely the Lithium Ion battery is shot. By removing all the screws in the deep holes on the back, and two tiny ones in the handle you can open the device up. The battery is soldered in but is easily removed with wire snips, On Amazon look for 18650 replacement battery and either solder to appropriate ends or get "18650 battery holder (what I did) you ll likely get a lot more years out of the device
4/30/2023 5:00:00 PM •
Radio...
•
Answered
on Apr 30, 2023
Columbia Walkie Talkie GM22 E 02 Off Error
It sounds like there may be a problem with your Walkie Talkie's display. The "E" and "O" symbols you are seeing could be error codes indicating an issue with the device's internal circuitry.
The "E 02" code could indicate a low battery or a problem with the device's power supply. The "O FF" code is less clear, but it could potentially be related to the device's frequency or channel settings.
4/14/2023 7:54:20 AM •
Radio...
•
Answered
on Apr 14, 2023
Galaxy DX 2547 Base Station CB Radio. I am showing 100 watts in power mode on it. Why?
Hi Bill, something is wrong with the meter, have you hooked an external power meter to the unit? I assume you get around 12 watt on sideband and 5 on am (legal limit). I didn't pull up a service manual on the unit but generally there is an IC that feeds the meter, get a manual for part number and replace the IC, it's going to be obvious what IC it is with the manual as it will have the outputs going from it
Not finding what you are looking for?