It's great that you're looking to revive your rechargeable lantern! Here are some steps you can take to find replacement parts and ensure your lantern is in working condition:
Check with the Manufacturer: Start by contacting the manufacturer of your rechargeable lantern. They may offer replacement parts for your specific model, including the light tubes. You can inquire about replacement batteries as well.
Search Online Retailers: Look for online retailers specializing in selling replacement parts for lanterns and flashlights. Websites like Amazon, eBay, or specialized outdoor equipment stores may carry the replacement light tubes you need. Make sure to check if they ship to Canada.
Visit Local Hardware or Outdoor Stores: Explore hardware stores, camping supply stores, or outdoor equipment retailers in your area. They may have replacement light tubes or similar products that are compatible with your lantern.
Consider Universal Light Tubes: If you cannot find the exact replacement light tubes for your lantern, consider purchasing universal light tubes that fit the size and specifications of your lantern's sockets. Be sure to measure the dimensions of the sockets and compare them with the specifications of the replacement tubes.
Test the Battery: Before purchasing replacement parts, it's a good idea to test the battery to see if it still holds a charge. If you have a compatible charger, you can try charging the battery and observing its performance. If the battery no longer holds a charge or shows signs of leakage, you'll need to replace it.
Inspect for Damage: Since the lantern has been in storage for several years, carefully inspect it for any signs of damage or wear, especially around the battery compartment and electrical components. If you notice any corrosion or damage, it's best to address those issues before using the lantern.
By following these steps, you should be able to find replacement parts for your rechargeable lantern and get it back into working condition. If you encounter any difficulties, don't hesitate to contact customer support or seek assistance from a local retailer.
Check Warranty: If your spotlight is still under warranty, you might be able to get a replacement switch or have the entire unit repaired or replaced by the manufacturer. Check the warranty information that came with your spotlight for details on how to proceed.
Contact Customer Support: Get in touch with the customer support department of the manufacturer or the retailer where you purchased the spotlight. They may be able to provide guidance on obtaining a replacement switch or offer repair services.
Search for Replacement Parts: Look online for retailers or websites that specialize in selling replacement parts for spotlights and lanterns. You might be able to find the specific switch you need for your model.
Consider DIY Repair: If you're comfortable with it, you could try opening up the spotlight and examining the switch yourself. Sometimes, switches can be repaired or cleaned to restore functionality. However, this approach requires some technical skill and might void any remaining warranty.
Seek Professional Help: If you're not confident in your ability to repair the switch yourself, consider taking the spotlight to a professional repair technician. They can diagnose the issue and either repair the existing switch or install a replacement for you.
Remember to prioritize your safety when attempting any DIY repairs, especially when working with electrical devices. If you're unsure or uncomfortable with any aspect of the repair process, it's best to seek professional assistance.
It sounds frustrating that your spotlight isn't working even after charging it for the recommended duration. Let's try to troubleshoot the issue. Here are a few steps you can take:
Check the Charging Connection: Ensure that the spotlight is properly connected to the charger and that the charger itself is plugged into a functioning power outlet. Sometimes, the connection might be loose or faulty.
Inspect the Battery: If the spotlight has a removable battery, check to see if it's properly seated in the spotlight. If it's not removable, you might need to skip this step.
Test the Charger: Try using the charger with another device to see if it's functioning properly. If the charger works with another device, it's likely not the issue.
Look for Indicator Lights: Some spotlights have indicator lights to show when they're charging or fully charged. Check to see if any indicator lights are functioning as they should.
Contact Customer Support: If none of the above steps resolve the issue, it's possible there's a defect with the spotlight itself. Contact the manufacturer's customer support for assistance. They may offer troubleshooting tips or be able to provide a replacement if the spotlight is still under warranty.
If you've tried these steps and still can't get your spotlight to work, reaching out to customer support is probably your best bet. They can offer more specialized assistance based on the specific model of your spotlight.
This one?
https://www.ebay.com/itm/335145703247
They are a bit of a gimmick, and of course are made for $2 in China.
The way they work is that they contain a small rechargeable NiMH battery. You can charge it via the wall adapter, or you can turn the crank which operates a small generator to charge the battery. It is likely that you can't run it directly from the mains, but it should light when you remove the charging cable and switch it on.
..
It carries an LED Module, so they aren't like replacing a halogen bulb, you have to replace the whole module with the LED.
Just replace the whole lamp for 10 bucks!
I remember that light, its a halogen bulbed searchlight with a sealed lead acid battery. Both technologies are obsolete, your battery is likely aged and can be replaced I think its a 17ah and about , $40. For a little more money they make a lifepo4 in the same format. If it were me though Id send it to the dumpster, led powered by lithium now equal its output but fit in your pocket.
To my knowledge this item has been discontinued by Coleman and is no longer available. However, I've listed basic instructions on changing batteries. Here's a link that you could watch for the disassembly for your flashlight type.
high power flashlight ct-50 (youtube.com)
Locate the battery compartment on the Coleman CT 50 flashlight. This is usually at one end of the flashlight and is secured with a cap or cover.
Depending on the design, unscrew the cap or remove the cover to access the battery compartment. Some flashlights may have a twist-off cap, while others may have a sliding cover or other mechanisms.
If there are existing batteries in the compartment, carefully remove them. Pay attention to the orientation of the batteries, noting the positive (+) and negative (-) ends.
Insert new batteries into the compartment, ensuring they are placed in the correct orientation. Match the positive and negative ends with the markings inside the battery compartment.
Once the new batteries are in place, securely put back the cap or cover. If it's a screw-on cap, tighten it until it's snug. If it's a sliding cover, ensure it clicks into place.
Turn on the flashlight to check if the new batteries are working correctly. If the flashlight doesn't turn on, double-check the battery orientation and make sure the connections are clean.
If the old batteries are disposable, make sure to recycle them properly. Many communities have specific recycling programs for batteries.
Always refer to the user manual or any included instructions for your specific flashlight model, as the steps may vary. If you don't have the manual, you can often find it on the manufacturer's website or contact Coleman's customer support for assistance. Additionally, be mindful of the type and size of batteries recommended for the flashlight to ensure optimal performance.
It should take 10-12 hours, any longer the battery is no good, you can test the battery using a Volt Meter, the battery should be reading 12 volts, any less and the battery will need to be replaced. You can order a new one from Black and Decker, they purchased Vector in 2006, here is the link; http://www.dewaltservicenet.com/servicenet_home.aspx?AspxAutoDetectCookieSupport=1
Whether or not to buy hiking shoes really depends on what kind of walking you plan to do and how often.Hiking boots are helpful for rougher terrain and for gripping. If you plan to mostly walk on flat ground, you can consider getting good walking shoes instead.
Question edited for clarity, 'full make model (what is is)' spelling of maker and all the missing letters. Please don't type in all CAPS.Question moved from Cameras category.Duplicate question deleted. Refresh page to see your question.Make sure the polarity of the batteries is correct.Contact Rayovac Support for help and warranty replacement.https://www.google.com/search?q=RAYCOVAC+SP8DTP..
I found four different versions of the AD100 operator's manual using the Furuno USA Get Support link, https://www.furunousa.com/en/get_support . The current link is https://www.furunousa.com/en/support/ad100 . Click on the Documents and Tech Info tab. The manuals depend on the age of the Gyro analog to digital converter.
I hope this helps.
Cindy Wells
