Camping, Backpacking & Hiking - Page 2 - Recent Questions, Troubleshooting & Support

Doesn't that suggest a blocked nozzle, requiring first a quick probe with a "pricker"?

Question moved from Cars and Trucks category to Flashlights. Apparently not easy if you use the 3 x AAA battery cartridge. Unscrew the base. https://www.amazon.com/ask/questions/Tx1DKW5P7LJ9IXV/ Sometimes they will take a rechargeable 18650 instead. https://nebo.acgbrands.com/en_US/lights/replacement-batteries.html https://www.arcade-electronics.com/v/vspfiles/nebo/120REDLINE%20Big%20Daddy%20User%20Manual.pdf ..

find the watts and voltage of the light , watts divided by volts. Example 100 watts divided by 12 volts = 8.4 amps. use a 10 amp fuse.

Question edited for the correct model name, and toss in some CAPS. Add '(what it is)'. The internal battery has failed or it needs resetting. Or return it under warranty. https://www.google.com/search?q=nebo+slyde+king+won%27t+charge ..

There are no parts for them. You just buy a new one. Or you might have someone 3D print you one. https://www.google.com/search?q=tinkerbell+lantern ..

I want to know too cause I can't get mind open.....

First two are month and the last is year.

Purportedly, twist the tailcap counter-clockwise.

Question edited for clarity. Question moved from Baby Gear. https://www.google.com/search?q=Assembly+instructions+for+a+10%27+x+13%27+Timber+Creek+Canopy ..

Taking apart a flashlight, including a Bushnell 600 Lumens flashlight, may not be recommended, as it can void the warranty and potentially damage the device. However, if you have a specific need to disassemble it, here are some general steps to follow: 1. Remove the batteries: Ensure the flashlight is turned off, and remove any batteries to prevent any accidental activation or electrical shock. 2. Look for screws or openings: Most flashlights have screws or openings around the head or tail cap that allow access to the internal components. 3. Unscrew components: Use the appropriate screwdriver or tool to remove any visible screws holding the flashlight together. If there are no screws, try gently twisting and separating the parts. 4. Be cautious with wires: If your flashlight has internal wires and circuitry, be extremely careful not to damage them while disassembling the flashlight. 5. Document your steps: Take photos or notes as you disassemble the flashlight to help you remember

Lots of help in the link, it is not easy but can be done. Batteries are just by the type https://www.google.com/search?q=Coleman+lantern+Model+5375+replace+battery

Try contacting COAST directly. I think they give a Lifetime Warranty on their flashlights. Ask for the repairs department. You never know, they might do it for you under the warranty. There's no harm in asking them.

I actually just did a lesson on this with my students. When the chemical hand warmer is removed from the outer packet and exposed to oxygen, it produces an exothermic chemical reaction, which is a reaction that gives off heat. The result of this reaction is iron oxide or rust.

unknown as to were not the manufacturer notify them or walmart as to replacement request with out receipt

The physical benefits kids achieve with athletic activity, such as cutting the risk of obesity, diabetes, heart disease and social and psychological benefits of getting involved in athletics while in school. The ratio of coaches to athletes is always a plus. Most youth sports only have money for one coach, but professional camps like organizers have a skilled coach for playing and training children in Camps for Youths in your Area. At camp, the athletes will be exposed to several coaches with a variety of coaching styles.

Check the little mother board. There is a peace that sticks out of the black plastic housing and makes contact to the inside metal frame of the flash light. Just gently pry open plastic housing that is behind led housing. You should See a sq opening on the side of the plastic housing. If it's missing a little contact there then solder a small peace of solder where the contact was. Make it just big enough to where when you slide It back in, it makes contact to body of the flashlight. What's happening is it connection to the negative is broken. I would take the part back out but I'm afraid if I do it may brake off the solder part. It was a tight fit but that black plastic peace that has the spring sticking out is that part. It should slide right out. After you unscrew the led housing from the unit. On my flash light, it's the board that has both usb connections on it. Again it's where there is a sq hole on the side of the black plastic housing that contains the usb ports. There will be a hole there for no obvious reasons. That's where you solder on a peace of solder to where it barly sticks past the plastic. Good luck. Sorry for bad pics. My light is the iPeotech 3200. Should be same principle for many different ones.

Question edited for spelling of the maker and toss in some CAPS! They make lots of models, and some have functions, like 'Strobe' and SOS. If it is just a plain one, the control circuit has failed, so return it under warranty. There are better an more reliable makes like Fenix, and StreamLight, but it is also possible that an electronics engineer can repair it.. https://www.google.com/search?q=Stanley+Ultra+Bright+LED+spotlight+blinks ..

Camp clotheslines are usually constructed of sturdy aluminum and are capable of holding a reasonable amount of laundry. The string is usually some kind of a rope, a twine or a cored that is stretched between two points.

How do you change the batteries. The batteries are in a case

Camp furniture is items like tables and chair that are made out of a durable material, are light and can be folded up and packed.