Building Materials - Page 7 - Recent Questions, Troubleshooting & Support

0helpful
1answer

I have a 1/3HP Liftmaster garage door opener with a doorbell switch. I held the green button too long now my doorbell switch doesn't work. Help?

go to liftmaster website and look up your model number, they have manuals on line or you can call them.
2/11/2022 12:11:24 AM • Building... • Answered on Feb 11, 2022
4helpful
2answers

Craftsman new 315MHz Garage door remote programming with old openers

The radio frequency has been changed so the two are not compatible.
1/31/2022 11:16:10 PM • Sears Craftsman... • Answered on Jan 31, 2022
0helpful
2answers

Rotting outside door and frame

Good quality timber, properly treated and painted with knotting where needed,1 coat of primer, 1 coat of undercoat and two coats of topcoat. On a hardwood stained door, at least 6 coats, with a new coat added every 2 years. Also fix any issues with water that is dripping or remaining near the wood.
1/30/2022 1:52:44 PM • Building... • Answered on Jan 30, 2022
0helpful
2answers

I have a model 1200.51 Stanley garage door opener. Bot a new remote and instructions say to press the learn button. I cannot find a learn button. Can you help?

you may have to take the cover off the control box and look for a small button with prog under it
1/19/2022 2:14:36 PM • Building... • Answered on Jan 19, 2022
0helpful
2answers

My genie garage dooropener is blinking red on the opener motor. It is suppose to be blue.

1. If both round and long LED's are blinking, unplug the opener motor for five seconds, and replug. If the lights go back to normal, it was just a program error. If they both continue to blink, it's probably not user-serviceable. 2. If the round LED is blinking and the long LED is off, it is usually the door sensors that are obstructed or knocked out of line. 3. If the Long LED is blinking and the round LED is off, it is usually a bad roller or hinge that won't let the door move freely, something stuck in a track or a bent track.
1/6/2022 3:34:16 PM • Building... • Answered on Jan 06, 2022
0helpful
3answers

How much laminated floor should I get?

You get an idea on how much laminated floor you will need by measuring the length and the width of the rooms that you plan on installing laminated floor, multiply the length by the width and add 10 percent for installing errors and variation in floor design.

1/6/2022 6:42:54 AM • Building... • Answered on Jan 06, 2022
0helpful
1answer

I'm looking for some more flooring like I have already. Can you help me please?

Question Edited for clarity. Question moved from Cameras to Flooring First link! https://www.google.com/search?q=style+selections+lowes+item++435869+dark+walnut+model++D2793+SB ..
1/5/2022 5:16:49 AM • Building... • Answered on Jan 05, 2022
0helpful
1answer

Learn button wont stay steady on sears craftsman garage door opener

shut off the power for 2 minutes to do a reset
12/2/2021 4:11:36 AM • Building... • Answered on Dec 02, 2021
0helpful
1answer
0helpful
1answer

How do you adjust the tension for self closing doors

Questions moved from Cars and Trucks Category to Doors. It depends on the type: Hydraulic that fix at the top of the door? There are two screws, they are normally on the end. There are two, one says 'CLOSE' and the other says 'LATCH'. Close is the first one that comes into play when you let go of the door and then Latch take over and shuts the door to lock with just the right amount of force. The screws only need SMALL movements. Or Peeko - Type door closers. These are fixed in the centre of the hinge door edge and frame edge and join the door to the frame with a chain that looks like a bicycle chain. For those, you open the door, slip a small nail in the chain near the frame. Undo the fitting in the door. Turning the chain and fitting tightens or loosens the spring on the door frame. ..
11/27/2021 1:03:17 AM • Building... • Answered on Nov 27, 2021
1helpful
1answer

Need to open a large Standard Safes Safetron full size safe that can't be removed as built into the surrounding space.space

If it has a digital keypad, that means it has an electronic magnetic solenoid lock. That means you can open it with a rare earth puck magnet https://www.google.com/search?q=open+safe+with+puck+magnet ..
11/22/2021 8:51:17 PM • Building... • Answered on Nov 22, 2021
0helpful
1answer

How to deal with high-frequency leakage in the inverter?

HF leakage must be addressed at the source and filtering is required.
11/17/2021 8:12:27 AM • Building... • Answered on Nov 17, 2021
0helpful
2answers

I need an instructions manual for a 1999 craftsman 53650 model opener.

contact the person from whom you have bought it.......
11/15/2021 3:13:25 PM • Craftsman Garage... • Answered on Nov 15, 2021
0helpful
1answer

My garage door opener opens my neighbor's door. How do I reprogram mine?

Google make model change DIP Switches
11/12/2021 3:01:32 AM • Building... • Answered on Nov 12, 2021
0helpful
1answer

Navigation screen on my 2007 tundra limited, xtra cab with 40,000 miles went black. The toyota logo flashes on the screen when i start the truck

needs software update, if the screen it self works. when not try to look for faulty cable, fuse etc...
11/5/2021 8:10:23 PM • Toyota Building... • Answered on Nov 05, 2021
0helpful
1answer

Model 3016. Can't find the learn button to reprogram the remote

11/1/2021 11:07:34 PM • Building... • Answered on Nov 01, 2021
Not finding what you are looking for?
Building Materials Logo

7,320 questions posted

Ask a Question

Usually answered in minutes!

Top Building Materials Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66850 Answers

Steve Pack
Steve Pack

Level 3 Expert

7126 Answers

Are you a Building Material Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...