Building Materials - Page 6 - Recent Questions, Troubleshooting & Support

0helpful
2answers

41A5021-3H craftsman garage door opener has 5 flashing lights on logic board.

You may be better served to replace the opener. I had 2 craftsman openers they were not worth the price of repair parts. Replace them with chamberlain from Home depot, Tried anther brand from Home depot but took it back. https://www.searspartsdirect.com/diy/error-codes/garage-door-opener-repair/1234637/craftsman-garage-door-opener/0247
6/12/2022 10:50:07 PM • Building... • Answered on Jun 12, 2022
0helpful
2answers

I have a Liftmaster Professional

It sure could be the capacitor. The symptoms are right for a bad capacitor.
5/11/2022 6:06:58 PM • Sears Craftsman... • Answered on May 11, 2022
0helpful
1answer

My garage door doesn't close normally

you may have to adjust down force, refer to manual that came with unit. If you do not have it contact liftmaster.
5/11/2022 3:58:50 AM • Building... • Answered on May 11, 2022
0helpful
1answer

Old Guardian 21230L no sensors door only opens but won't close

copy and paste https://www.manualslib.com/products/Guardian-21230l-4059331.html
4/15/2022 9:38:40 PM • Building... • Answered on Apr 15, 2022
1helpful
1answer

Guardian 715 Pro Issues - 15 Beeps?

You could phone Guardian direct, but this suggests it might be a relay. https://www.google.com/search?q=guardian+715+pro+opens+and+closes ..
4/5/2022 2:24:41 AM • Building... • Answered on Apr 05, 2022
0helpful
1answer

Genie pro screw 1/2 HP model cm8600ic opens door, but motor keeps running when door is all of the way up ,

Probably failure or misadjustment of a limit switch
3/29/2022 11:07:33 PM • Genie Pro... • Answered on Mar 29, 2022
0helpful
1answer

Liftmaster garage door opener stuck

Since the garage door only opens with the door unattached I would first check your garage door torsions springs. The garage door opener actually does not lift the door. The springs actually do the lifting. The most likely solution to your problem. Best Wishes, Frank Security Door Gate and Fence. https://www.securitydoorgatefence.com
3/22/2022 11:50:04 PM • Building... • Answered on Mar 22, 2022
0helpful
1answer

Why is my Overhead brand 556 Garage Door running one sec down and one sec up?

Question edited for clarity, 557 to 556 in title, plus 'what it is'. Troubleshooting on page 17 of the manual https://garagedoorguy89.weebly.com/uploads/4/5/4/9/45496029/ohd556-656.pdf https://www.google.com/search?q=Overhead+556+door ..
3/18/2022 4:15:03 AM • Building... • Answered on Mar 18, 2022
0helpful
1answer

RAYNOR model AVIATOR, 3280RGD residential opener. Why did lamps fail?

If the lamps test OK, there probably has been a circuit failure inside the opener.
3/14/2022 5:29:16 PM • Building... • Answered on Mar 14, 2022
1helpful
1answer

My Amana fridge with a bottom freezer is making very fast clicking sounds coming from the front of the freezer.

As the switch gets used it starts to wear out. The clicking you are hearing is likely a faulty switch. Cheap and easy to DIY. Replace according to your series number.
2/23/2022 2:36:32 PM • Building... • Answered on Feb 23, 2022
0helpful
1answer

My DIGIDOOR Il Garage Door Operator just opens half way. How can I fix this please.

Question edited for clarity. Question moved from Cars and Trucks to Garage Doors. This is a South African make whereas we are in North America. This search query may work better for you. https://www.google.com/search?q=digidoor+2+opens+half+way ..
2/21/2022 7:33:21 PM • Building... • Answered on Feb 21, 2022
0helpful
1answer

What is an ABS pump and are they difficult to fit?

no info generic answer ABS == anti-lock braking system =pump has brake lines attached and sensors hooked into it system activates when senses wheel starting to skid/lock up
2/16/2022 12:38:34 PM • Building... • Answered on Feb 16, 2022
0helpful
1answer
0helpful
1answer

Garage door opener not working after car remote set and worked

If it was working fine and nothing was changed by you then the issue is the opener itself. There is a bad connection or other components in it that have failed,
2/11/2022 9:11:34 PM • Toyota Building... • Answered on Feb 11, 2022
1helpful
1answer

On my Genie garage door opener, do the sensors have to line up for the red and green sensor lights to come on

You did not list the model number and that would have been better but, there may be a problem with the sending unit on the sensor, the receiver or the power to them from the opener motor unit. You can test for sender failure if they are UV by using your camera phone and look for a purple light coming from it, you can test for output using a voltmeter
2/11/2022 9:02:06 PM • Building... • Answered on Feb 11, 2022
1helpful
1answer

My Genie garage door opener flashing red. The door will not open or close. The sensors do no light up either. Help!

I would pull handle on opener track and close door. The flashing red indicates the sensors are not aligned read the instructions that came with unit and they will tell you how to align them.. Now one of them may be bad, you can buy replacements at Home depot or Lowes. You can find more info at genie or google you model number and manual is available for free. If you would like more help let me know model number.
2/11/2022 8:28:11 PM • Building... • Answered on Feb 11, 2022
Not finding what you are looking for?
Building Materials Logo

7,320 questions posted

Ask a Question

Usually answered in minutes!

Top Building Materials Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

Steve Pack
Steve Pack

Level 3 Expert

7128 Answers

Are you a Building Material Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...