Home - Page 7 - Recent Questions, Troubleshooting & Support
How do I replace the MR16 bulb?
How many do you want Scott Davis? Halogen or LED?
https://www.google.com/search?q=MR16+bulb
Joseph Murphy. We are only 9 years late, but there are two bases, one is two pins which just pull off and are 12 volt. and the other is a 110 volt bayonet fitting, just turn about 20 degrees anti clock wise. In both cases, gently pull the fitting out of the ceiling to replace the bulb. There is a butterfly spring that holds them in.
8/3/2023 8:35:08 PM •
Home
•
Answered
on Aug 03, 2023
88900 Atomic Clock does not read time and temperature.
Batteries must come out of both the temperature sensor (transmitter) and base (clock and temperature display). Leave out for about 4 minutes. Replace the batteries in the temperature sensor FIRST and set it about 5 - 10 feet away from the base. Replace the batteries in the base and leave them both set without touching any buttons for at least 15 minutes (usually only takes 5 minutes or so). The temperature should start to display. You can set the clock manually to the correct time and have it get the updates via radio in the evening or night. Should work after all this just fine. (have done it alot of times this way over the years)
Good luck.
Toto Neorest 600 issue of low water pressure
page 35 of your instructions. Don't have it, here is a link copy and paste
https://www.totousa.com/filemanager_uploads/product_assets/OwnersManual/0GU9001R_NEOREST_600_EN_OM.pdf
7/8/2023 3:46:16 PM •
Toto Home
•
Answered
on Jul 08, 2023
I want to find where
Marathi is actually a language in india, in mumbay (bombay) region, it is official language of marathi (maharashtra) province in Western India, it was official language of last hindu empire before british conquest.
Jaiswar meant "destination", there are several hundred places with this name in india, this is also a term describing lower cast jobs, for example jaiswar kalwar - alcohol distillers caste. Jaiswal Jains - direction jains - is actually region in norther india settled by jains people, Jaiswal - is actually surname meaning - "citizen of Jais"
Marathi jaiswal - is actually as well sort of wedding offer...
6/27/2023 2:11:57 AM •
Home
•
Answered
on Jun 27, 2023
I have a coroma opal II toilet seat that needs to be replaced due to corrosion of the hinges, however am unable to losses the bolts?
I'm sorry to hear about the issue you're experiencing with your Coroma Opal II toilet seat. If you're unable to loosen the bolts that secure the seat to the toilet bowl, here are a few suggestions you can try:
1. Apply penetrating oil: Spray some penetrating oil, such as WD-40, onto the bolts and let it sit for a few minutes. This can help loosen the rust and corrosion and make it easier to remove the bolts.
2. Use a wrench or pliers: If the bolts are not budging, you can try using an adjustable wrench or pliers to grip the bolts and apply more torque while attempting to unscrew them. Make sure to hold the nut underneath the toilet bowl to prevent it from turning.
3. Apply heat: Heat can sometimes help break the bond caused by corrosion. You can use a hairdryer or a heat gun to warm up the bolts, which might make it easier to remove them. Be cautious not to overheat any plastic parts.
4. Cut the bolts: As a last resort, you may need to cut the bolts using a hacksaw or a reciprocating saw. Take care not to damage the toilet bowl while doing this.
If you're still having trouble, it might be best to contact a professional plumber for assistance. They have the tools and expertise to handle difficult situations like this without causing damage to your toilet.
6/19/2023 10:12:44 AM •
Home
•
Answered
on Jun 19, 2023
Not finding what you are looking for?