Home - Page 4 - Recent Questions, Troubleshooting & Support
The on off light in my Jacuzzi whirlpool bath keeps flashing
The flashing on/off light in a Jacuzzi whirlpool bath may indicate an issue with the control system, and it's important to address the problem to ensure the proper functioning and safety of the whirlpool bath. Here are some general steps you can take to troubleshoot the issue:
1. Check the Power Supply:
- Ensure that the whirlpool bath is receiving power. Verify that the circuit breaker for the whirlpool bath is not tripped, and check for any loose or disconnected power cords.
2. Inspect the Control Panel:
- Examine the control panel for any visible issues, such as loose or damaged wires, connectors, or buttons. Ensure that there is no water or moisture present in the control panel area.
3. Reset the System:
- Some whirlpool baths have a reset function. Turn off the power to the unit, wait for a few minutes, and then turn it back on. This can sometimes reset the control system.
4. Refer to the User Manual:
- Check the user manual that came with your Jacuzzi whirlpool bath for specific information on troubleshooting and resetting the control system. The manual may provide insights into the meaning of the flashing light and how to address it.
5. Contact Jacuzzi Customer Support:
- If the issue persists and you cannot find a resolution through the manual, contact Jacuzzi customer support or the manufacturer for assistance. They may be able to provide guidance on how to troubleshoot and resolve the issue.
6. Professional Inspection:
- If you're not comfortable or able to identify and fix the issue, it's advisable to seek assistance from a qualified professional or a technician experienced in Jacuzzi whirlpool bath systems. They can perform a thorough inspection and diagnose and repair any electrical or control system problems.
It's essential to prioritize safety and follow proper procedures when dealing with electrical components and water. If you're uncertain or if the troubleshooting steps don't resolve the issue, it's best to seek professional assistance to avoid potential hazards.
12/17/2023 11:37:18 AM •
Jacuzzi Home
•
Answered
on Dec 17, 2023
Unscrewed and removed flush button system on Estilo cystern still can't remove lid. Squeezed only back has some give without results.
Assuming you have taken out the flush button framework from an Estilo reservoir and are experiencing issues eliminating the top, here are a few stages you can attempt:
1. Squeeze the Sides:
- As you referenced, have a go at pressing the sides of the tank close to the back. This is a typical technique for delivering the tabs or gets that safe the tank cover. Apply firm however delicate strain while pressing.
2. Lift from the Back:
- In the wake of crushing the sides, take a stab at lifting the rear of the top marginally. Now and again, there are tabs or gets at the front that might should be withdrawn first.
3. Check for Screws or Clips:
- Examine the region around the highest point of the reservoir for any screws, cuts, or different latches that may be holding the top set up. Some latrine tanks have stowed away clasp that should be relaxed or delivered.
4. Tap or Wiggle:
- Tenderly tap or squirm the top while lifting it. This can assist with releasing any close associations or gets that might be holding the top set up.
5. Inspect the Front:
- Actually look at the front of the reservoir for any apparent tabs, gets, or locking systems. On the off chance that present, you might have to press or delivery these to free the cover.
6. Refer to the Client Manual:
- Assuming you have the client manual for the Estilo storage, it might give explicit directions on the most proficient method to eliminate the top. Check for any data with respect to cover expulsion or investigating.
7. Contact the Manufacturer:
- When in doubt, consider connecting with the maker's client care for help. They might have the option to give direction or explicit guidelines in view of the model of your reservoir.
Continuously practice alert while working with plumbing installations, and on the off chance that you're uncertain about any step or experience obstruction, looking for proficient assistance is prudent. Mistaken taking care of can prompt harm or breaks in the latrine tank.
12/17/2023 11:34:58 AM •
Home
•
Answered
on Dec 17, 2023
How do I set the time/date etc on my clock? Model 65904
Ecotech solar clock
I don't have specific information about the Model 65904 Ecotech solar clock, but here are general steps you can try to set the time and date on a typical clock:
1. Locate the Time Setting Button:
- Look for a button that is labeled "Time Set" or similar. This button is often located on the back or bottom of the clock.
2. Press and Hold the Time Setting Button:
- Press and hold the "Time Set" button until the numbers on the clock display start flashing or blinking. This indicates that you are now in the time-setting mode.
3. Adjust the Time:
- Once the numbers are blinking, use the "+" or "-" buttons to adjust the hours and minutes. Some clocks may have separate buttons for hours and minutes, while others may have a single button that cycles through hours and minutes.
4. Set the Date (if applicable):
- If your clock displays the date, you may need to follow a similar process to set the date. Look for a "Date Set" button and adjust the date using the same method as adjusting the time.
5. Confirm the Settings:
- After setting the time and date, press the "Time Set" or a similar button again to confirm your settings. The blinking numbers should stop, indicating that the clock has accepted the new time and date.
6. Check for Other Settings:
- Some clocks may have additional settings, such as a 12/24-hour format or a daylight saving time (DST) adjustment. If applicable, use the appropriate buttons to configure these settings.
If these general steps don't work for your specific clock model, I recommend trying to locate the user manual or contacting the manufacturer directly for assistance. Manufacturers often provide manuals on their websites, or they may be able to assist you with setting the time and date over the phone.
12/17/2023 11:32:39 AM •
Home
•
Answered
on Dec 17, 2023
Ken-Tech Clock. How to switch regular time to military time on it please?
Question edited for clarity.
Question moved to Clocks - Home.
There are about 6 different models, but it is this one....
T-4652-manual
MANUAL TIME SETTING Press and hold the SET key for 2 seconds. The display will show progressively: 12/24 time format. Toggle to the form desired with the UP and DOWN buttons. HOURS digits will flash progressively if you press the SET button again. ... T-4652-manual.jpg Created Date: 3/31/2021 3:06:23 PM ...
MANUAL TIME SETTING Press and hold the SET key for 2 seconds. The display will show progressively: 12/24 time format. ...
Created Date: 3/31/2021 3 .
..
12/8/2023 12:28:31 AM •
Home
•
Answered
on Dec 08, 2023
Home Pest Control In Cleveland
Don't waste your free time on complicated pest problems anymore. Additionally, put away that jug of over-the-counter pesticide. I think there's more harm than good with it.
For ongoing or one-time pest treatment in your home, we can assist.
Forget about having to clean ants off your countertops and the agony of discovering mouse droppings in your drawers.
Give this part of housekeeping to us, and you can enjoy a healthy home. https://www.lakewoodexterminating.com/
Not finding what you are looking for?