Baseball & Softball - Page 4 - Recent Questions, Troubleshooting & Support

Any batted ball that strikes a defense player is considered a live ball

(a) Little League (Major) Division: Any candidate with amateur status who will attain the age of 9 years before September 1, 2016, and who will not attain the age of 13 before May 1 of the year in question shall be eligible to compete in Little League Baseball (subject to the local league Board of Directors alignment ...

Are you using the right size fuse I would call jugs and ask them what fuse it takes you could also have a wire that's exposed and touching something metal look for that too

Amanda, If you already have the speed up, then it would be a tension issue, look for tension adjustment, this will squeeze the ball harder, hense will not slip and will toss ball better.

Have you contacted Iron Mike yet. Most small a/c motors only go in one direction. Need more info. Was it was working correctly, then changed? Or did you buy it used this way? If the machine is NOT turned off in the correct position, then restarted quickly, it will run backwards and jam up the chain. You may need a new motor. email me if needed, Steve Manookian Pitching machine repair, Los Angeles area, [email protected]

You can buy them at any local sporting goods store like Sports Authority, Foot Locker or Modell's.

yes.

Depends on how tall you are.

You can buy them at Bernard's Sporting Goods on Oak Street or at Sports Authority next to the Paramus Park mall, in Paramus. That's where I get all of my baseball stuff.

and yet you do not state make and model

There can be two possible reasons for this to occur. The first would be that the pitching machine might need more power than that which is available at home, or the machine might be working for a long time and may have got heated up.

Take off the cover and make sure the wire is connected to the knob and check the wire maybe it's exposed an not working properly

It depends on the machine but usually the answer is less. Just be aware that doing this can change the trajectory of the ball because baseballs are much lighter than the rubber balls.

Iron Mike Pitching machines can be configured for baseball, fast pitch & slow pitch softball.

What's wrong with it need more info

Look for stripped wires that could be your problem if you find any tape them up with electrical tape

Pretty sure you can download a PDF file on the website

Hi Miguel, Sorry I don't have its control panel diagram, but I think this will help you.

They should be made of plastic and between 25 and 27 inches in length.