Archery - Page 9 - Recent Questions, Troubleshooting & Support

Ebay if you are lucky, Horton is out of business.

Have you tried a cocking aid or rope ?

On the rear of the stock there is a groove.

Sounds like cable guide is worn or dry. try some light oil and work it back and forth.

out of business try ebay ?

google winners choice strings.

This string is not installed properly. You can remove the loose side twist it tighter and reinstall but you need to press the bow to do this.

There are two bolts that hold the limbs onto the riser. Tighten them all the way tight or clockwise. This will ensure they are the same. Now you have to turn both bolts equal turns up to no more than 3 turns out. The looser the less weight. Never loosen more than 3 turns.

look in the manual and you will see what number coinsides with which draw length. On each cam there is a module with numbers on them. You set these to adjust draw length.

remove string and check limb pocket inserts and limbs for delamination or coming apart. You can buy string dampners if it is just string slap.

They are all manufacturer specific. Never had anyone ask that before ?

requires a special bow press see your local archery dealer. very dangerous and easy to miss a bent pulley groove.

Load a bolt and fire into the soft earth sand , dirt.

Horton out of business trigger pack assy is bad. replace if you can find...ebay ?

arrow rest ? need picture.

manufacturer.

The big box stores like cabelas has them. Just ask we used to give them away for free when I worked for them. Also maybe on the web for free.

Ebay seller has them.

Where did you buy it...ebay or ?

Most archery shops will put your bow together for free with purchase.