Breville Refrigerators - Recent Questions, Troubleshooting & Support

Please check if this is the model you have and maybe this can help. good luck. d066f00e-d454-4535-8840-331d35e2a9ef.pdf

I'm not exactly sure what you mean by a washing machine hookup. Most washing machines hookups have two hose bibbs (faucets that a hose can screw on to), one for hot and one for cold. Refrigerators have a 1/4 inch flexible line, either copper or plastic. So, I'm assuming that you mean you have a hose bibb for the water supply and you want to connect it to the quarter inch line on the fridge.

The best approach would be to remove the hose bibb and connect to the line that is feeding it. Assuming that it is a 1/2" rigid copper pipe you can get adaptors at a plumbing store or at a store like Home Depot to step it down to 1/4", then connect to the fridge line with a compression fitting. If your hose bibb is threaded, you would start at the wall with the same size threaded connection and see what your local store has available in the line of adaptors. Best would be if you can find a single adaptor that will go from 1/2" to 1/4". You may need one to go from 1/2" to 3/8" and another to go from 3/8" to 1/4".

A second approach that would be a jury rig type of thing (say if you can't get the hose bibb off) would be to get a hose end connector to attach to the faucet and step it down with clamps and tubing. Use adaptors that fit inside tubing of successively smaller sizes (2 steps will probably do it) ending with 1/4" plastic that you can attach to your fridge with a compression union. (they make 3/8" to 1/4" compression unions, so you would only need to end with a 3/8 inch tube making the connection with the adaptor/union.

Modify this according to what you have in the house (say if you have 5/8" water lines instead of 1/2").

If I'm not understanding your problem correctly, please clarify.

HOW TO USE

First you place the Wine Cooler on a flat, dry surface, making sure that the timer is in the "off" position.

Remove the chill cells from the freezer and place around the inside of the cooler.

Thirdly, place the bottle inside the cooler and then pour cold tap water inside, until it just covers the top of the chill cells.

You can then plug the unit in, or if it has batteries you don't need to.

Finally, you set the control dial to the desired time. The following are recommendations for different types of beverages:

Sparkling Wine, Champagne and Dessert Wine.....9 minutes

Dry Wines, Sauvignon Blanc, Riesling.....6 minutes

Chardonnay, Rose'....5 minutes

Light Red Wines, Pinot Noir....3.8 minutes

Full Bodied Reds, Shiraz, Grenache, Cab Sauvignon, Merlot....3 minutes

If you choose to chill a beverage without the timer, you just turn the control to the left and when you are done you turn it to the off position.

In addition to wine, the cooler can also chill beer and soft drinks. The only limitation is that the bottle diameter can be no more than 3.75 inches.

Should you wish to chill two or more consecutive bottles, the cells will remain cold enough for you to to do so.

While not in use, the cooler can also be used on the table with ice to keep your beverages cold (much like a regular ice bucket).

The power cord is removable, which makes for an easy clean-up.

The unit comes with a manufacturer's One-Year Limited Warranty.

Mi es de 1hp necesito saber c?mo van los cables de conexi?n el?ctrica al protector termico y el relay

yes it is

Humming is a classic sign that the start / run capacitor for the compressor has failed. Call for service, have it checked for gas and condenser cleaned. ..

Question edited for clarity. Question moved from Cars and Trucks category. This is primarily a South African make and not one we know here in North America. This link should work better where you live and provide some insight. https://www.google.com/search?q=DEFY+DOUBLE+DOOR+FRIDGE+DFF417+error+OC2 ..

You probably need to replace the water filter.... https://www.partstown.com/hisense/hrf266n6cse/filters-screens-driers/parts

https://video.search.yahoo.com/search/video?fr=mcafee&p=Ice+dispenser+won%27t+stop+running&type=E210US1494G0#id=2&vid=30691769491d1616470402498715efe1&action=click This may not be your model but could help you.

On an AEG SANTO 3533, the tray sits on top of the compressor. There is a short metal "tunnel" on top of the compressor. The tray has a plastic clip in the middle which goes through the tunnel and latches up on the other side. To remove, reach to the back of the metal in the middle of the tray, press the plastic clip firmly down, and pull/wiggle the tray backwards horizontally to remove. Needed a torch to see clearly on mine. One of these things that's easy once you've done it once.

Copper has anantibacterial effect. Studies recommend storing water in copper containers for several hours before consumption to maximize this benefit. Some research suggests 48 hours. perhaps explore dedicatedcopper water bottlesfrom reputable sources for optimal water storage. This refers to water, not juices.

Question edited for clarity. Help and videos in the link. However it is 40 years old and has probably seen better days. There isn't much you can do if it needs refrigerant gas as you need a certified engineer. https://www.google.com/search?q=1984+Norcold+8310+series+RV+refrigerator+that+isn%27t+working ..

All questions need 'make model (what it is) first 3 words please. https://www.google.com/search?q=Refrigerator+Question+mark+flashing+next+to+temperature+numbers ..

Sometimes the timer jmalfunctions and the refrigerator will not go in to a defrost mode. Try unplugging it and defrost the refrig and plug it in again.

Hi
You are right. The only way to repair this is by replacing the complete door assembly. If under a year it should be covered.

The defrost timer in a Hisense upside-down fridge freezer, model number HR6BMFF520S, is typically located within the control panel or the refrigerator compartment. Here are the general steps to locate it:

1. Check the Control Panel: Start by inspecting the control panel of the refrigerator. Look for any knobs, buttons, or switches that control the defrost cycle. The defrost timer may be integrated into this panel.
2. Inside the Refrigerator Compartment: If you don't find the defrost timer in the control panel, check inside the refrigerator compartment. It might be located near the temperature control settings or the light fixture. You may need to remove any covers or panels to access it.
3. Consult the User Manual: If you're having trouble locating the defrost timer, refer to the user manual that came with your fridge freezer. It often contains detailed diagrams and information about the location of various components, including the defrost timer.
4. Contact Hisense Customer Support: If you're still unable to locate the defrost timer, consider reaching out to Hisense customer support for assistance. They can provide specific guidance based on your refrigerator model and help you locate the timer.

Once you've located the defrost timer, you can follow the manufacturer's instructions for troubleshooting or replacing it if necessary.

This is your freezer. https://www.google.com/search?q=Artic+Air+Model+AF49EX My advice is to check the defrost heater for efficiency and also for correct placement. You could also add an additional heater rod or heater blanket to the place where is freezes up. https://www.google.com/search?q=Artic+Air+Model+AF49EX+defrost+heater ..

See Troubleshooting section in user manual Troubleshooting; Problems And Solutions - Samsung SR-L62 series Owner's Instructions Manual [Page 17] ' ManualsLib User manual Samsung SR-L629EV (English - 22 pages) Samsung refrigerator error codes