Bell Howell Cameras - Page 4 - Recent Questions, Troubleshooting & Support

OK, I'll need an idea of what the old cable looked like. I'm assuming the camera end was a 'Headphones' style plug. A headphones connector of that type is usually a 3.5mm size. Was the other end a single cable, a pair of cables or a set of 3? Can you remember if the were coloured or had coloured marks on them, Commonly red and white for audio and yellow for video. Note this is a video connection cable and it is unlikely you will be able to transfer video to record it. This is an 'Analogue' camera and the cable is basically there so you playback video you took on a larger screen using the camera as a playback machine.

You are terribly confused Philip, we are FIXYA dot com and didn't supply you with anything. We only supply FREE ADVICE. We are not who you think we are!

All CF cards on the MPU/SRU do not support hot swap. In the ME60-X8 and ME60-X16 chassis, the CF cards support hot swap after the offline buttons of CF cards are pressed. CF card cannot be supported on the X3 models of the ME60.

It is often possible to recover deleted files, including pictures, from a computer or camera. However, the success of the recovery process depends on a number of factors, including how the files were deleted and whether they have been overwritten by new data. To recover the deleted pictures from your computer, you can try using a file recovery software program. There are many options available, both free and paid, that can scan your hard drive for deleted files and attempt to recover them. Some popular options include Recuva, Disk Drill, and PhotoRec. To recover the deleted pictures from your camera, you can try using a digital image recovery software program. These programs are designed specifically to recover deleted images from digital cameras, memory cards, and other storage devices. Some popular options include CardRecovery and Digital Photo Recovery. It is important to note that recovery software may not be able to recover all deleted files, and the chances of successful recovery decrease as more data is written to the storage device. If you are unable to recover the deleted pictures using software, you may need to consult a data recovery professional for assistance. They will have the tools and expertise to attempt a more thorough recovery of the lost data.

Question edited for better English and correct typo. No make and model given, so generic information only. Cameras normally have their own software package where you can open a program and move, edit or delete images. Or You can connect the camera to a computer and open Windows File Explorer. In the left pane you will see the camera as a 'Volume'. I may have the name of the camera or just something like E:\ If you click on that there will be a storage folder in the camera with all the images. You can transfer images to the computer and also delete them..

If your pen camera is not opening or functioning properly after charging and resetting it, here are a few troubleshooting steps you can try:

1. Check the power source: Ensure that the charging cable or power source you are using is functioning correctly. Try using a different charging cable or connecting it to a different power outlet or USB port to see if that resolves the issue.
2. Reset the device: Perform a hard reset on the pen camera. This typically involves pressing and holding the reset button (if available) or removing and reinserting the battery. Refer to the user manual of your specific pen camera model for instructions on how to perform a reset.
3. Charge the device for an extended period: Sometimes, a longer charging time may be required if the battery is completely drained. Leave the pen camera connected to the charger for an extended period, such as overnight, and then try turning it on again.
4. Check for firmware updates: Visit the manufacturer's website or contact their customer support to check if there are any available firmware updates for your pen camera. Updating the firmware may resolve any software-related issues.
5. Contact customer support: If none of the above steps resolve the issue, it is advisable to reach out to the manufacturer's customer support for further assistance. They may provide additional troubleshooting steps or suggest sending the device for repair or replacement if it is still under warranty.

https://www.wearecb.com/service-manual-for-75-810.html

To change the battery on your Night Owl Explorer NOCX3 monocular, you will need to follow these steps:

1. Unscrew the battery compartment cover located at the bottom of the monocular 1.
2. Remove the old battery from the compartment 1.
3. Insert a new 3-volt lithium battery (123 type), which is also known as the CR 123A, EL 123AP or DL 123A 1.
4. Screw the battery compartment cover back into place 1.

Please note that some models of Night Owl Explorer use 2 standard AA batteries instead of a 3-volt lithium battery 1. I hope this helps you change the battery on your Night Owl Explorer NOCX3 monocular! Let me know if you have any other questions. Please always refer to the user manual. Night Owl NOCX3 Manuals and User Guides, Monocular Manuals - All-Guides.com (all-guidesbox.com)

Terry, Jammed button errors (bE, bE2, bC2, 6E, 6E2, 6C2) This appears if a button on the panel is detected as stuck or continuously pressed. If you get this error, power off the dryer unplug or off at breaker, and then individually touch and release every button on the panel, working back and forth to reach all edges of each button. Power back up.