Bamix Blenders - Recent Questions, Troubleshooting & Support

There is help here, but the only way to check is to take it apart. It will be either a shear pin or some form of clutch mechanism that provides the drive from the motor to the stick and blades. https://www.google.com/search?q=Bamix+won%27t+spin%2C+but+the+motor+is+running ..

try to gently twist the blade up and around the shaft with a pair of pliers. I've loosened mine by pushing and pulling on the blade with the pliers. be sure to use caution so as not to wreck the blade.

Question moved from Washing Machines, to Bamix Blender. That information is not available anywhere. You will only get it from Bamix direct, IF they will let you have it. bamix® USA - Hand Blenders & Accessories - mybamix.com Ad·https://www.mybamix.com/ Upgrade Your Culinary Toolkit Today With the Swiss-Made bamix® Hand Blender. Order Now! The bamix® Immersion Blender is the Right Tool For Every Job. Lifetime Warranty. Master Your Chef Skills. Easy Healthy Recipes. Lifetime Warranty. A Milliion & 1 Uses. There is quite a network of repairers in Australia! https://bamix.com.au/stockists?type=Repairer ..

Instructions state to remove it, turn it clockwise, so the opposite remains true. To replace it, turn it counterclockwise.

Those small plastig bungs do come out, you will need a fine probe to prise them out then you will see 2 philips head screws which hold it all together, not sure how you will tighten your shaft though, looks like it might be moulded into the plastic retainer, good luck! on mine the motor bearings are seized,
regards,
Dave Pary.

Could you give more info? I have a Bamix with all the accessories so maybe able to help.:-)

-Try each one that come with . So You will know which one is the best for it. Good luck Mai

All three are available on Amazon.

I believe the issue is more with the method of preparation. Try slowly adding the oil when preparation the mayo and that should alleviate the problem.

Good luck and Happy Eating,
Alex

I agree it is the motor.

no that is good, just be careful when you plug in

the coil part of the spinner is damaged,change the coil or check for whether the spinner is damaged.get to local repair shop and repair it.it will cost low.

Bar mix products made millions for world wide sales kitchen aids that change design so often they cant support a large parts division (R&D is geared to sell the next better barmix product ) if you cannot find a new old part or super ceeded shaft from the next model up or used drive shaft for sale online look for a complete used bar mix spice blender/chopper some people collect barmix units for a hobby or collection and sell double ups when you say old model if the shaft is plastic ....... its .unfix able its a heat molded construction process Vintage Bamix M122 2-Speed Hand Held Food Blender Mixer-Chopper

You could email bamix.com.au. The motors have a 20 year warranty I think. Get a quote before any repairs , as some times replacement is the best option.

Pearl, link below to Bamix customer service and support. "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." http://www.bamix.com/en/home

Skim milk has little to no fat, therefore it will not thicken when whipping. If you want to whip it, I suggest you dissolve a packet of unflavored gelatin in 1/4 oz skim milk, microwave it for about 30 seconds until the gelatin is dissolved, and add 2-3/4 cups cold skim milk. Refrigerate for about 15 minutes or until the consistency of egg whites, then try whipping it. Good luck!