...or cracked, and repaired if necessary. You must then know how to put all this back together and torque all the bolts in the proper sequence. This takes training and skill which the average shade ...
...front wheel and splash shield NOTE: Place a 1 in. x 1 in. x 2 in. long block of wood between the torque strut and cradle to ease removal and installation of the torque engine mount. 3 right side ...
...torque-to-yield). the way the saturn timing components are ran i would not suggest this unless you are heavily mechanically inclined. theres alot of tedious tear down as well as torqueing to spec on ...
why do i have oil in my radiator Sounds like your head gasket is leaking. If the head is not warped, replace head gasket and torque to manu. specs.
...torque spec are as follows, step one is 22 ftlbs then step 2 is 33ftlbs and the third step is to tighten bolts 90degrees more also the bolt tightening sequence is here, this is a diagram of the bolts ...
i was wondering if anyone could tell me the torque specs on the valve cover on a 97 saturn with a 1.9L dual overhead cam 120 inch/lb (10 ft/lb.) out of my field service manual
...are using new head bolts (Recommended) install the head and toque the bolts to 48 ft.lps.follow the torque sequence in the picture below . Then remove the bolts and and coat the threads lightly with ...
need head bolt torque specs for a 1996 saturn sl Quote: Originally Posted by norvelplagbao52 1993 saturn sl2 1.9 dohc cylinder head torque specs and sequence Cylinder head bolt tightening procedure: ...
Question about 1999 SL
Looking for torque spec for front wheel bearing on a Saturn sl1 1999 Looking at different sites and read between 75inch pounds to135 foot pounds 148 ft lbs
Question about 1994 Sl
What are the torque spec a 1994 saturnsl1 for the rocker arm assably From what I can find it is 19 foot lbs for the rocker arm shaft.
Usually answered in minutes!
1,310 Questions
953 Questions
963 Questions
862 Questions
606 Questions
