...specs for front wheel hub nut I replaced a wheel bearings and seals, but need to know the torque spec for the front hub nut 112 to 174 ft lbs i need the torque spec for the rear wheel bearing ...
what is the torque spec for wheel nuts on a 2009 Rio5? Thanks 95 ft/lbs
torque specs for 2004 kia rio cylinder head replacement youre going to torque it to 65 ft lbs.. start from the centre out and go diagonally. be sure to replace the head bolts and very lightly oil them
I need flywheel torque specs for 2004 kia rio hi this is no problem it is 93nm, leave for 10 minuets then tighten to 103nm hope this helps please vote thanks
i need to know the torque specs for the cylinder head bolts for a 1.6 liter dovc 2005 kia rio What about the torque pattern, or is there an indepth manual online somewhere? Timing belt broke, now I am
What is the torque range on cylinder head bolt? first tighten to 36.1 foot pounds of torque starting in the center bolts and going in a circle. the pattern if you were to dray it on paper would ...
torque specs for 1.5 kia rio connecting rod looking torque specs for 2002 1.5 kia rio for the connecting rod bearings and main bearings TORQUE SPECIFICATIONS kia rio Cylinder Head Bolts: (21.7ft.lb) ...
...cylinder head bolts for rotational reference. Rotate cylinder head bolts 90°(1/4 Turn) in order shown. CAUTION: Do not reuse the old cylinder head bolts. I the torque spec on a 2013 Kia ...
What are the torque specs for the clutch plate on a 20 KIA RIO? I'm replacing the clutch and the cover for the clutch and all I need help is with the torque lbs for every bolts for the clutch and the ...
2004 kia Rio I need to know torque specs and sequence take it off and on torque of head bolts with alloy head will be approx 65lbs ,the correct way is tighten to so many nm then 50?back then so many ...
Usually answered in minutes!
685 Questions
635 Questions
542 Questions
457 Questions
277 Questions