Questions & Answers for: Ford F-150 torque spec s

...torque spec's for the bolt's holding the big end cap on the conrod Torque sequence: Step 1: Torque 29 to 34 Ft/Lbs Step 2: Torque an additional 90 to 120 degrees copy and paste that also does anyone ...

torque specs foe 4.9 ford f150 flywheel torque specs 75-85 ft lbs

main and rod bearing torque specs i need the torque specs for my rod bearings and my main bearings do you have a Haynes Manual or Chilton? if not check your local library, they may have one, the specs

torque specs What are the torque specs for rod bearings on a 1997 ford f150?? hi, Main Bearing Cap Bolts 75-85 56-62 Connecting Rod Cap Nuts 31-39 23-28

...torque spec on the rear diff. cover bolts - 2005 F-150 i need the torque spec on the rear diff. cover bolts on a 2005 F-150. it's the 12 bolt cover if that makes a difference. just tighten them down ...

I have 4.9L6 need torque specs for cylinder head I have 1988 F150 4.9L6 need torque specs for cylinder head and rocker arms for cylinder head the torque is : step 1 55 ft-lb, step 2 65 ft-lb, step 3 ...

...torque spec on a 2004 F-150 what is the spindle nut torque spec on a 2004 F-150 (holds the rotor on.) u DON'T torque this!! tighten the nut while spinng the rotor, then back off untiol it is free, ...

what is the foot pound torque for the wheel nut on a 1991 F-150? The foot pound torque is 100 foot punds for the lug nuts. The torque specs for your 1991 ford f-150 wheel nut specs are 100ftlbs, good ...

2000 f150 5.4 triton rod caps and main cap torque spec installin new bearings and i need torque specs Well I did what the book said and I couldn't turn the crank at all  

...should be fine, they're not head bolts or lug nuts, so torque specs aren't necessary, but if you REALLY need the torque spec, I'd suggest going into an f-150 forum, sounds like a logical thing to