Questions & Answers for: spin counter clockwise agitate washing

spin cycle which turns counter clockwise. I only bought my washer 4 years ago. Thank you. Zoobs, you could have something stuck under the agitator. The agitator will pull straight off. Grip it on each

...spin if I unscrew it... how do you remove the agitator and is it a possible solution? thanks :) Your Agiator "Dogs" maybe stripped these hold the agiator in the wash cycle place you han on top of the ...

...spin on wash cycle tub spins fast counter clockwise on wash cycle forcing water out of the tub, agitator turns counter clockwise. machine very quiet. fault may be tacho on motor fallen off or round ...

...spin freely when I turn it counter clockwise by hand, but when I turn it clock wise it locks up and will not turn. The agitator is supposed to turn freely one way then catch the other. in the top of ...

...counter clockwise. The transmission disengages the agitator when it is in the spin mode. If you put the washer in the spin cycle the agitator should free up. If the washer is spining ok and the ...

...shaft and clutch assembly wasn't assembled properly. the agitator should spin counter clockwise and clock wise(both ways). I would return this unit for an exchange before the warranty is

...counter-clockwise during agitate cycle so it essentially just spins. Has a little bit of slow and back to clockwise, but not much. you need to see if the motor turns one direction during wash and the ...

spin cycles work fine... What am I missing? if this is a two piece agitator,it should behave like a ratchet turn freely clockwise and catch counter clockwise if it doesn't catch the agitator "dogs

spin counter clockwise but it locks up when I try to spin it clockwise. Any Idea's Thanks George. It has a large nut under the cap on the top of the agitator, but it will be the devil to remove due to

...spin, and drain. The fault is. It won't agitate/ wash the clothes. What requires replacing? Hi, Try a power cycle before replacing any parts. You can also turn your dial counter clockwise and retest ...