Questions & Answers for: shock install

...install: Fully extend the shock absorber stem, then push it up through thelower control arm and spring so that the upper stem passes through themounting hole in the upper control arm frame bracket. ...

Install the lower portion of the shock, next with the upper end aimed to where you want it to go, cut the cable holding the shock back. The nitrogen within the shock will cause it to slowly extend. If

...shock tower hole. Install the lower shock studs into the axle bracket. Install the mounting nuts and tighten to 250 in. lbs. (28 Nm). Remove support and lower the vehicle. Install the upper grommet, ...

shock absorber To Install: Install or connect the following: Lower retainer and grommet on the shock absorber stud and insert shock absorber through frame bracket hole Lower nuts Torque to: 25 ft. lbs

install: Position the top of the shock absorber with the insulator attached into the suspension support. Install or connect the following: Upper shock insulator, retainer and nut. Torque the nut to 55

...install hoses to shock and put your own air in them, there would be a valve you install under the bumper or where ever you like, you would ask for a air shock hose kit, easy to install. hope this ...

...shock absorbers at the lower attachment and install the attaching bolt. Lower the vehicle enough to guide the shock absorber upper stud through the body opening, then fasten the upper shock absorber ...

...Install the shock absorber in the vehicle and loosely tighten the upper shock absorber nut. Make sure the install the bushings and washers before installing the upper nut. For 4WD vehicles, install ...

...Install the shock absorber onto the upper and lower mounting studs of the vehicle. Install the washers and retaining nuts. Tighten the upper and lower retaining nuts to 22-30 ft. lbs. (30-41 Nm) on ...

...Install the shock to the vehicle. Notice: Refer to Fastener Notice in Service Precautions. Install the upper shock bolt. Tighten the bolt to 110 Nm (81 ft. Lbs.). For right side only, install splash ...