Questions & Answers for: Pontiac Sunfire ignition coil

Question about 2003 Sunfire

1 Answer

...ignition coil pack. Simply remove the spark plug wires from each coil pack and test. Both (if good) should test about the same resistance, (about 5-7 kOhms, but I don't have the exact specs handy on ...

Ad

...If your getting no spark from the plugs check the ignition module/coil.If there's power to it while cranking and no spark coming from it then the coil is your problem which is common on these

Ad

coil packs, ignition module(under coilpacks). check all fuses as well I had the same problem with my Pontiac Sunfire. I had to replace the ignition module. Cleared it right up. i have a 95 sunfire and

...ignition coil assembly is locate on the side of the block towards the firewall and under the intake manifold-2.2L engine.-------- Thanks. Keep updated for any more query. You can rate this solution ...

Question about 1999 Sunfire

1 Answer

...ignition coil. If the coil is worn out it tends to fail that's why the vehicle stalls in any given time. I suggest an ignition coil swap to resolve the problem. Hope this helps and thank you for ...

Question about 1997 Sunfire

1 Answer

1997 sunfire ignition modual were is it it is the flat component the ignition coils sit on with 2 cable connectors and the coil securing bolts also secure the ignition module

ignition coil pack, new ignition coil pack module and it still won't start but makes the whir 2003 pontiac sunfire, car won';t start just makes a whirring noise, I put a new starter on it,

...ignition coil located 2004 pontiac sunfire foloow the spark plug wires from the motor to where they connect to the coil. if the coil is remote then there will be a fifth wire coming out of the dist. ...

...fire One coil serves those two cylinders (no. 1 and 4), so try repllacing that coil. first check see if ignition fuse okay.if yes,need code scan for faulty crankshaft sensor or faulty ignition

Question about 2000 Sunfire

1 Answer

...coil there is the ignition module . it is the primary circuit to trigger the coil . the coil itself is the secondary circuit . you have to test ignition module first ,,,, remove coil test with led ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...